Denbighshire · Wales
Bath re-enamelling & resurfacing in Y Ffrith, Denbighshire
Bath re-enamelling across Y Ffrith and nearby, done in a single visit in most cases.
- Resurfacing from £350
- A coloured bath you want in white
- Brown or grey marks that don’t clean off
Bath re-enamelling in Y Ffrith without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on cast iron baths, Victorian roll-tops and pressed steel baths, and people most frequently call us about brown or grey marks that don’t clean off and a bath that stays dull however much you clean it.
All of our repairs are guaranteed for twelve months in Y Ffrith and everywhere else. If something goes wrong with the work, we come back.
- Location
- Y Ffrith (LL19, LL18)
- Area hub
- Denbighshire
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repairing versus replacing in Y Ffrith
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. You will see the full price before booking.
What you get with us
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- Same prices wherever you are
- Every repair guaranteed for a year
See our prices page or guide to resurfacing and replacement costs.
Other services in Y Ffrith
When a repair isn’t the answer
Some jobs aren’t right for a repair, for example:
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Do you need bath re-enamelling in Y Ffrith?
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, normally first under the taps and around the waste.
Customers generally contact us about:
- A coloured bath you want in white
- Chips and rust in more than one place
- A dull, rough surface that won’t come clean
- Brown or grey marks that do not clean off
What to look for in a quote
- Whether they match the colour on site
- A fixed quote, and whether VAT is included
- What prep work is covered
- What aftercare is recommended
What affects the price in Y Ffrith
Prices start from £350. We price every job individually. What matters most is:
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- The material and finish
- The colour and finish to match
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from pictures
A couple of clear pictures is all it takes. It helps if you send:
- Where you are, by postcode
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Any details about the material
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
The process
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the next day.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
Ask for a price
If you’re in Y Ffrith and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Read more
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
FAQs for Y Ffrith
Which areas do you work in?
We cover the entire UK, including Y Ffrith and the rest of Denbighshire. Just include your postcode and we’ll confirm dates.
What happens next?
You will get a fixed quote back, plus dates. You’re under no obligation.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Are there extra charges for Y Ffrith?
We don’t add a call-out fee. Your fixed price includes everything.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do you work in Y Ffrith?
Yes. We cover the entire UK and come to Y Ffrith. Send pictures and we’ll quote, or call 0345 017 0787.
Our work in Y Ffrith
Y Ffrith is about 1 mile west of Prestatyn, in Denbighshire. Across the LL19 area, a technician comes to you. Y Ffrith is one of 81 towns and villages in Denbighshire where we work. You can also see our page for Liverpool, about 21 miles away.
Our visits in LL19 and LL18 are booked in the same way as anywhere else. We regularly work on streets such as Marion Road, Ceri Avenue and Morgan Road and the roads around them. Neighbouring places we cover include Prestatyn (1 mile east), Meliden (1 mile south-east), Tan-yr-allt (2 miles south-east), Bryniau (2 miles south-east) and Rhyl (2 miles south-west). Larger places within reach include Denbigh (10 miles south), Kinmel Bay (4 miles south-west), Fron (10 miles south), Copenhagen (10 miles south), Bryn Seion (10 miles south) and Rhuddlan (3 miles south-west).
What’s near Y Ffrith
Locally, our jobs take us to homes close to Prestatyn High School, Ffrith Beach Arena Park and Horeb Welsh Methodist Chapel and the streets around them. Nearby too are Ysgol Clawdd Offa (within half a mile south-east) and The Ffrith pub (less than half a mile north-east). The closest station to Y Ffrith is Prestatyn station, roughly 1 mile east. Other landmarks nearby include Rhyl Museum (2.5 miles west) and Prestatyn Castle (1.6 miles east). The countryside around Y Ffrith includes Rhuddlan Nature Reserve and Marine Lake.
About our accreditations · Every repair comes with a one-year guarantee.
