East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Hensall, East Riding of Yorkshire
Full bath re-enamelling and resurfacing for homes and businesses in Hensall and across East Riding of Yorkshire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Several chips and rust patches
- Worn patches where water runs and sits
Hensall: your questions answered
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
Will there be a smell?
Expect a mild smell while we’re working.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
What happens after I send photos?
You get a fixed price and available dates. If we need another angle, we will ask.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
What areas do you cover?
We cover the whole UK, including Hensall and the rest of East Riding of Yorkshire. Send your postcode with your pictures and we’ll confirm dates.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Bath re-enamelling at your home in Hensall
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Whether it’s a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, we can typically put it right, on basins & shower trays, acrylic baths and cast iron baths alike.
Whatever the size of the job, it’s backed by a one-year guarantee in Hensall and across East Riding of Yorkshire.
- Where
- Hensall (DN14)
- Region
- East Riding of Yorkshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Hensall
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
For anyone letting property in or around Hensall, we will quote for several properties at once. Just send pictures for each address and we’ll price them together.
Our work in Hensall
Hensall is about 6 miles south of Selby, in East Riding of Yorkshire. From the centre of Hensall to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Hensall is one of 299 towns and villages in East Riding of Yorkshire where we work. Our nearest city page is Leeds, about 19 miles away.
Postcode districts we cover here: DN14. That includes homes on Station Road, Main Street and Finkle Street and the roads around them. If you’re just outside Hensall, we cover Eggborough (2 miles west), Chapel Haddlesey (2 miles north), Kellington (2 miles north-west), West Haddlesey (3 miles north-west) and Burn (3 miles north). Further out, we also cover Goole (10 miles east), Howden (10 miles east), Snaith (4 miles east), Carlton (4 miles east), Rawcliffe (6 miles east) and Hook (11 miles east).
Local landmarks in Hensall
In Hensall, that means homes near Hensall Community Primary School, Railway Tavern and Church of St Paul. There is a railway station in Hensall itself: Hensall station.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How the visit works
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Let us know which floor the room is on
- Have a window or extractor fan available
- Clear the area around the damage
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Related advice
When to call us in Hensall
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Common reasons people in Hensall contact us include:
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- Thin, worn enamel in places
What your quote should include
- What the guarantee covers, and for how long
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- Whether cleaning and preparation are in the price
Why repair rather than replace?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
What you get with us
- We come to you, anywhere in the UK
- CHAS, Constructionline and SafeContractor accredited
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
Take a look at our prices page or resurfacing vs replacement cost guide.
Towns and villages near Hensall
What else we do in Hensall
What a repair can’t fix
We will always be straight with you, so here’s what a repair cannot fix:
- A bath that is rusted through
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
