Hertfordshire · England

Bath Re-enamelling in Hertford Heath

Problem with your bath in Hertford Heath? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • An outdated colour you’d like to change
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Hertford Heath

Bath re-enamelling in Hertford Heath, done in place

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We regularly repair Victorian roll-tops, acrylic baths and pressed steel baths, and common reasons people get in touch are a dull, rough surface that won’t come clean and several chips and rust patches.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Where
Hertford Heath (SG13)
Area hub
Hertfordshire
Warranty
A year, on every repair
Price
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

What happens on the day

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Make sure the area is dry
  • Plan for the room to be out of bounds to pets and children

Get a quote

If you’re in Hertford Heath and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Send pictures for a quote

Advice

About Hertford Heath

Hertford Heath is about 2 miles south-east of Hertford, in Hertfordshire. Jobs in Hertford Heath are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We cover all 381 towns and villages in Hertfordshire. We work right across the region, from Hertford Heath to London (about 20 miles away).

Every address in SG13 is within our area, from the main roads to the quietest streets. From London Road, Woodland Road and Trinity Road or anywhere nearby, we can come to you. Hertford Heath is on the B1197, which makes it straightforward to reach. We also cover the places around Hertford Heath: Little Amwell (1 mile east), Foxholes (1 mile north-west), Rush Green (1 mile north), Hailey (1 mile east) and Woollensbrook (1 mile south-east). Larger places within reach include Stevenage (10 miles north-west), St Albans (12 miles west), Bishop's Stortford (10 miles north-east), Welwyn Garden City (6 miles west), Harpenden (13 miles west) and Hitchin (15 miles north-west).

Near you in Hertford Heath

Locally, our jobs take us to homes close to Simon Balle All-Through School, Barclay Park and Hertford Heath Primary and Nursery School and the streets around them. Other local landmarks include Church of the Holy Trinity (less than half a mile north) and The College Arms (less than half a mile south). Hertford Heath’s nearest station is Hertford East station, roughly 1.6 miles north-west of the centre. Nearby you will also find Hertford County Hospital (2.1 miles north-west) and Museum of Street Lighting (1.5 miles north-east). For a walk, there is Hertford Heath nature reserve.

Map of Hertford Heath © OpenStreetMap contributors

Should you replace it?

When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Why book with us

  • A fixed quote before booking
  • Colour-matched on site
  • We come to you, anywhere in the UK
  • Most jobs done in one visit

Read our full price list and resurfacing vs replacement cost guide.

Common questions in Hertford Heath

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

Is it worth repairing rather than replacing?

Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.

Do you cover Hertford Heath?

Yes. We cover the whole UK and travel to Hertford Heath and the rest of Hertfordshire. Send pictures and we will quote, or call 0345 017 0787.

What happens after I send pictures?

You get a fixed quote and available dates. If anything’s unclear, we will ask for another photo.

Can you re-enamel a roll-top bath?

Yes. Inside and out if you’d like.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

How to look after the repair

Nothing complicated is needed:

  • Clean with a soft cloth and mild detergent
  • Store bottles off the bath
  • Fix dripping taps quickly
  • Wipe the bath dry after use in hard water areas

The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

Materials and what they mean for the repair

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.

When to call us in Hertford Heath

Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, typically first under the taps and around the waste.

You may need us if you’ve spotted:

  • A peeling or bubbling previous coating
  • A roll-top that’s seen better days
  • A dull, rough surface that won’t come clean
  • Several chips and rust patches

What to look for in a quote

  • Aftercare advice
  • How long the guarantee is and what it covers
  • Whether the price is fixed and includes VAT
  • What protection goes down before work starts

Our hiring checklist

When a repair isn’t the answer

It helps to know what we cannot do:

  • Leaks from fittings rather than the bath
  • Anything hidden under an old coating, until we remove it
  • Acrylic that moves when you stand in it

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths

DIY kit or professional repair?

If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Prices and what affects them

Resurfacing from £350. You will not pay by the hour. The price depends on:

  • Previous DIY repairs that have to come out
  • The colour and finish to match
  • Whether we combine several jobs
  • What kind of damage it is

Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Send photos for a quote

We price nearly every job from photos. This is what we need:

  • Whether it’s been repaired or coated before
  • What it’s made of, if you know
  • Daylight if possible, and no flash reflection
  • Something in shot to show the size

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.