Hertfordshire · England
Bath Resealing in Hertford Heath
We travel to Hertford Heath for bath, shower and sink resealing with new mould-resistant silicone. Nothing is taken out, and the work is guaranteed.
- Unsealed corners
- A messy previous reseal
- Mould you cannot clean out
Resealing in Hertford Heath: why it matters
A reseal is one of the cheapest bathroom jobs there is and protects the walls and floor. Leaving failed sealant can let water cause damage that costs far more to fix. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
Why us?
- A fixed quote before you book
- One-year guarantee on every repair
- Dust sheets down, tidy finish
- Nothing taken out or refitted
See our full price list.
How we handle bath resealing in Hertford Heath
A proper reseal starts with removing every trace of the old silicone. Fresh sealant doesn’t stick to old, which is why many DIY jobs peel. Our technicians work on kitchen worktops & sinks, shower trays & enclosures and basins & vanity units, and common reasons people get in touch are old sealant that looks dirty and a messy previous reseal.
All our work is covered by a one-year guarantee.
- Where
- Hertford Heath (SG13)
- County
- Hertfordshire
- Warranty
- 12 months on all our work
- Price
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
About Hertford Heath
Hertford Heath is about 2 miles south-east of Hertford, in Hertfordshire. Wherever you are in the SG13 postcode area, we carry out the work at your property. Hertford Heath is one of 381 towns and villages in Hertfordshire where we work. Our nearest city page is London, about 20 miles away.
Jobs in SG13 are booked in the same way as anywhere else. Whether you live on London Road, Woodland Road and Trinity Road or a nearby road, we can come to you. Hertford Heath is on the B1197, which makes it straightforward to reach. Neighbouring places we cover include Little Amwell (1 mile east), Foxholes (1 mile north-west), Rush Green (1 mile north), Hailey (1 mile east) and Woollensbrook (1 mile south-east). Further out, we also cover Stevenage (10 miles north-west), St Albans (12 miles west), Bishop's Stortford (10 miles north-east), Welwyn Garden City (6 miles west), Harpenden (13 miles west) and Hitchin (15 miles north-west).
Local landmarks in Hertford Heath
Locally, our jobs take us to homes close to Simon Balle All-Through School, Barclay Park and Hertford Heath Primary and Nursery School, among other places. Nearby too are Church of the Holy Trinity (within half a mile north) and The College Arms (within half a mile south). For rail, the closest station is Hertford East station, roughly 1.6 miles north-west of the centre. Other landmarks nearby include Hertford County Hospital (2.1 miles north-west) and Museum of Street Lighting (1.5 miles north-east). Not far away are Hertford Heath nature reserve.
Places near Hertford Heath
Other services in Hertford Heath
What bath resealing costs
You will know the full cost before you book. We look at:
- Where the damage is and how we get to it
- Whether we combine several jobs
- The size and number of damaged areas
- How hard the colour is to match
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
When you take your pictures, a few simple things make all the difference:
- Any details about the material
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- A clear, close picture of the problem area
A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower, include your postcode and send them over. What comes back is a fixed price, not a guess.
Materials and what they mean for the repair
Baths
Baths are resealed with water in them, to open the joint fully.
Shower trays
Trays are sealed with weight on them, for the same reason.
When we’d advise against a repair
Some jobs aren’t right for a repair, including:
- Very wide gaps that need a trim
- Loose tiles, which need refixing first
- A flexing bath
If in doubt, send photos and we’ll say what we think.
What we work on
- Kitchen worktops & sinks
- Wet rooms
- Baths
- Shower trays & enclosures
- Basins & vanity units
Keeping it looking good
To keep it looking its best:
- Replace the seal when mould sets in
- Run the extractor fan during and after showers
- Clean the sealant gently and regularly
- Wipe the joints dry after use
Let it cure fully before using the bath or shower, normally about a day.
Don’t wait until water gets behind the bath. Gaps or lifting edges mean it needs doing.
Landlord and trade work in Hertford Heath
For anyone letting property in or around Hertford Heath, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
We work for landlords, letting agents and housing providers in Hertford Heath as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
FAQs for Hertford Heath
Does someone need to be in?
We need someone to let us in. After that, you can carry on with your day.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
How long will it take?
Normally a couple of hours, plus curing time.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Why does my sealant keep going mouldy?
Normally poor ventilation and moisture sitting on the joint. Mould-resistant silicone and good ventilation help.
My seal keeps tearing. Why?
Generally because the bath or tray moves. We seal baths full of water.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes about two hours for a bath. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- The old silicone is cut out completely.
- We remove the residue and clean the joint.
- We treat mould and dry the joint thoroughly.
- We fill the bath, or weight the tray, to open the joint.
- New mould-resistant silicone is applied and tooled neatly.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Make sure the area is dry
Getting a price
To get a price, send two or three photos using our quote form or ring us. We will say straight away whether it can be repaired.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
