Stockport · England
Bath re-enamelling & resurfacing in High Lane, Stockport
Our technicians come to High Lane for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
Landlord and trade work in High Lane
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Bath re-enamelling in High Lane, done in place
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. We are often asked to fix an outdated colour you’d like to change and several chips and rust patches, on Victorian roll-tops, acrylic baths and basins & shower trays.
Every job is backed for twelve months in High Lane and everywhere else. If something goes wrong with the work, we come back.
- Location
- High Lane (SK6, SK12)
- County
- Stockport
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Do you need bath re-enamelling in High Lane?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
The things clients normally mention when they call are:
- Thin, worn enamel in places
- Several chips and rust patches
- Enamel that’s lost its shine and feels rough
- A bath in a colour that no longer suits
What to look for in a quote
- What protection goes down before work starts
- What preparation is included
- Whether they match the colour on site
- How to care for the finish
Should you replace it?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- Colour-matched on site
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
See our pricing and bath cost comparison.
Your questions about bath re-enamelling in High Lane
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
How long will the bath be out of use?
Usually one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Is there a call-out fee?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Does the bath have to be removed?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Honest limits
A repair isn’t right for every job, for example:
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- The material
- Whether we combine several jobs
- Unusual colours or finishes
- Access to the area
Our prices are the same across the UK, with no extra for High Lane. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from photos
Most quotes are done from pictures alone. To help us price it:
- A clear, close picture of the problem area
- Something in shot to show the size
- Any details about the material
- A picture taken from further back
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
How it works
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take a full day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the day after.
How to prepare
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
How to get a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Advice
Covering High Lane
High Lane is about 2 miles south of Marple, in Stockport. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 42 towns and villages in Stockport. We work right across the region, from High Lane to Manchester (10 miles away).
We cover every part of the SK6 and SK12 postcode area and the streets around it. You will find streets such as Woodside Drive, Buxton Road and Orford Close, all of which we cover. Other places close to High Lane include Windlehurst (1 mile north), Middlewood (1 mile south-west), Turf Lea (1 mile north-east), Higher Poynton (1 mile south-west) and Marpleridge (1 mile north-east). Further out, we also cover Stockport (5 miles north-west), Cheadle Hulme (5 miles west), Burnage (7 miles north-west), Bramhall (4 miles west), Reddish (6 miles north-west) and Cheadle (6 miles west).
What’s near High Lane
Typical jobs here are in homes near Poynton High School, Dog and Partridge pub and High Lane Primary School, among other places. The nearest railway station is Middlewood station, about 0.7 miles south-west of the centre. Nearby you will also find Avro Heritage Museum (4 miles south-west) and Stepping Hill Hospital (2.9 miles north-west). For a walk, there is Lantern Pike.
Towns and villages near High Lane
Also in High Lane
About our accreditations · Every repair comes with a one-year guarantee.
