Stockport · England
Bath re-enamelling & resurfacing in Windlehurst, Stockport
Full bath re-enamelling and resurfacing for homes and businesses in Windlehurst and across Stockport. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Brown or grey marks that don’t clean off
Bath re-enamelling in Windlehurst without replacing anything
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. If you are dealing with lots of chips and rust spots and a bath in a colour that no longer suits, we can typically put it right, whatever the material.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Where
- Windlehurst (SK6)
- Region
- Stockport
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Do you need bath re-enamelling in Windlehurst?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Most people contact us after spotting something like this:
- A peeling or bubbling previous coating
- Several chips and rust patches
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
What your quote should include
- When it can be used again
- What protection goes down before work starts
- What aftercare is recommended
- Whether they match the colour on site
How the visit works
You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. It normally takes a full day, and you’re welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the day after.
How to prepare
- Have somewhere for us to park nearby if possible
- Open a window if you can
- Clear toiletries, mats and anything else from around the area
Getting a price
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Read more
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we pay close attention there.
Windlehurst and the surrounding area
Windlehurst is about 2 miles south of Marple, in Stockport. Our technicians come to clients in Windlehurst, so nothing has to leave your home. We work in all 42 towns and villages across Stockport, from the larger towns to small villages. Our jobs stretch from Windlehurst to Manchester (about 9 miles away).
Here we cover the SK6 postcode area. From Coniston Road, Windlehurst Road and Grasmere Crescent or a nearby road, a technician can come to you. We also cover the places around Windlehurst: High Lane (1 mile south), Hawk Green (1 mile north-east), Turf Lea (1 mile east), Marpleridge (1 mile north-east) and Middlewood (1 mile south). We also work in nearby towns such as Stockport (4 miles north-west), Cheadle Hulme (5 miles west), Burnage (7 miles north-west), Bramhall (4 miles west), Reddish (6 miles north-west) and Cheadle (6 miles west).
What’s near Windlehurst
Typical jobs here are in homes near High Lane Primary School, Whitworth Community High School and Windlehurst Methodist Church, among other places. For rail, the closest station is Middlewood station, roughly 1 mile south of the centre. Further afield, we also cover the area around Stepping Hill Hospital (2.5 miles west) and Stockport Rural District (3 miles north-west). The countryside around Windlehurst includes Werneth Low.
Work for landlords and builders
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What a repair can’t fix
A repair isn’t right for every job, including:
- Acrylic that moves when you stand in it
- A metal bath with a through crack
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think before booking.
What we work on
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Also near Windlehurst
Also in Windlehurst
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Don’t let dyes or oils sit on the finish
- Don’t leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Windlehurst questions
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
Are there extra charges for Windlehurst?
Travel is included in the price, and we charge the same wherever you are.
How do I get a price for bath re-enamelling in Windlehurst?
Resurfacing from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
What affects the price in Windlehurst
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- The colour and finish to match
- Where the damage is and how we get to it
- The type of damage
- Any earlier repairs that need removing first
Our prices are the same across the UK, with no extra for Windlehurst. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your photos
Two or three clear pictures are normally enough. It helps if you send:
- Natural light rather than flash
- One sharp close-up of the damage
- A wider photo showing the whole bath
- Where you are, by postcode
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our accreditations · Every repair comes with a one-year guarantee.
