Doncaster · England
Bath re-enamelling & resurfacing in High Melton, Doncaster
Bath re-enamelling for High Melton, without a refit. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- An outdated colour you’d like to change
- Thin, worn enamel in places
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
- Do not leave a chip unrepaired
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Bath re-enamelling at your home in High Melton
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We work on acrylic baths, cast iron baths and Victorian roll-tops, and common reasons people contact us are several chips and rust patches and a period or roll-top bath worth keeping.
We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.
- Location
- High Melton (DN5)
- Area hub
- Doncaster
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Also near High Melton
Also in High Melton
The process
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes most of the day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
High Melton: your questions answered
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and you will get one combined price.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What happens once I’ve sent photos?
We come back with a fixed quote, usually with dates to choose from. You’re under no obligation.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room protected and ventilated.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What we are called out for in High Melton
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Contact us if you’ve noticed any of these:
- A peeling or bubbling previous coating
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
What your quote should include
- What happens if they find more damage
- When it can be used again
- What protection goes down before work starts
- How long the guarantee is and what it covers
High Melton and the surrounding area
High Melton is about 5 miles south of Adwick le Street, in Doncaster. Jobs in High Melton are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We cover all 89 towns and villages in Doncaster. Our nearest city page is Leeds, about 24 miles away.
We cover every part of DN5 and the streets around it. Streets in the area include Doncaster Road and Hangman Stone Lane. Close by, we cover Harlington (2 miles west), Barnburgh (2 miles north-west), Marr (2 miles north), Adwick upon Dearne (3 miles west) and Hickleton (3 miles north-west). We also work in nearby towns such as Doncaster (5 miles east), Adwick le Street (5 miles north), Thorne (13 miles north-east), Bentley (4 miles north-east), Armthorpe (8 miles east) and New Rossington (7 miles east).
Landmarks near High Melton
Our clients here include homes close to St James' Church, De Warenne Academy and Sprotborough Flash. For rail, the closest station is Conisbrough station, roughly 1.6 miles south. Nearby you’ll also find Conisbrough Castle (2 miles south) and Montagu Hospital (2.4 miles west). For a walk, there’s Denaby Ings and Highfields Lake.
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details.
Housing associations and facilities teams use us for planned and reactive repairs in Doncaster and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What we cannot put right
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Leaks from fittings rather than the bath
- A metal bath with a through crack
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send photos and we will give you a straight answer.
Materials we work on in High Melton
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
What affects the price in High Melton
Resurfacing from £350. A fixed quote means you know the cost before you book. We take into account:
- The colour and finish to match
- Any earlier repairs that need removing first
- How much damage there is
- The type of damage
Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Quotes from your photos
Two or three clear photos are usually enough. It helps if you send:
- One picture of the whole bath
- A clear, close picture of the problem area
- The material, if you know it
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
