Doncaster · England
Bath re-enamelling & resurfacing in Pickburn, Doncaster
Bath re-enamelling for Pickburn, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- A roll-top that’s seen better days
- Lots of chips and rust spots
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Bath re-enamelling at your home in Pickburn
Most baths are re-enamelled in a day. Nothing is disconnected or removed. Our repair technicians work on basins & shower trays, acrylic baths and cast iron baths, and the jobs we see most are wear marks under the taps and a coloured bath you want in white.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Area
- Pickburn (DN5)
- County
- Doncaster
- Cover
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Nothing complicated is needed:
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Fix dripping taps quickly
- Stick to gentle, non-abrasive cleaners
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Pickburn. The price depends on:
- Access to the area
- Whether we combine several jobs
- How hard the colour is to match
- What the surface is made of
We charge the same wherever you are, so there is no premium for Pickburn. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
Photographing the damage takes a minute. Try to send:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
- A coin beside the damage so we can judge size
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Common questions in Pickburn
Can you redo someone else’s repair?
Typically, yes. We remove the old repair before doing a new one, so mention it when you send photos.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Can you fix a peeling bath coating?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Are there extra charges for Pickburn?
No. Our quotes include travel, and we charge the same wherever you are.
Landlord and trade work in Pickburn
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Landlords, letting agents and housing providers in Pickburn use us as well as homeowners. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
Places near Pickburn
More services for Pickburn
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Should you replace it?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
What you get with us
- Technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
- Honest advice, even when it means no job
- We leave the room as we found it
See our full price list and guide to resurfacing and replacement costs.
Do you need bath re-enamelling in Pickburn?
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Signs it’s time to call us include:
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
- Staining under the taps and around the waste
- A coloured bath you want in white
Before you book anyone
- How your room will be protected
- What aftercare is recommended
- What preparation is included
- Who will actually do the work
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow most of the day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Related advice
Pickburn and nearby
Pickburn is about 1 mile south-west of Adwick le Street, in Doncaster. From the centre of Pickburn to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Our repair technicians cover all 89 towns and villages in Doncaster, from the larger towns to small villages. Our nearest city page is Leeds, about 22 miles away.
We cover every part of DN5 and the streets around it. From Doncaster Road, Pickburn Lane and Red House Lane or anywhere nearby, a technician can come to you. Neighbouring places we cover include Brodsworth (1 mile west), Marr (1 mile south), Skellow (2 miles north), Hampole (2 miles north) and Hooton Pagnell (2 miles west). Within a short drive, we also cover Doncaster (5 miles south-east), Thorne (11 miles east), Conisbrough (6 miles south), Bentley (3 miles east), Armthorpe (7 miles east) and New Rossington (8 miles south-east).
Local landmarks in Pickburn
We visit homes around Church of All Saints, The Woodlands Primary School and Outwood Academy Adwick and the streets around them. The nearest railway station is Adwick station, roughly 1.7 miles north-east. Further afield, we also cover the area around Hangthwaite (2 miles east) and Doncaster Royal Infirmary (4.9 miles south-east). For a walk, there is Highfields Lake and Thorpe Marsh Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
