Suffolk · England
Bath re-enamelling & resurfacing in High Street, Suffolk
Full bath re-enamelling and resurfacing for householders, landlords and businesses in High Street. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coloured bath you want in white
Bath re-enamelling in High Street without replacing anything
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We regularly repair pressed steel baths, cast iron baths and acrylic baths, and common reasons people contact us are an old resurfacing that’s failing and wear marks under the taps.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Location
- High Street (NR34, NR35)
- Area hub
- Suffolk
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why High Street clients choose us
- Usually one visit, start to finish
- We come to you, anywhere in the UK
- We leave the room as we found it
- Free fixed quotes from pictures
Read our pricing and resurfacing vs replacement cost guide.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Leave the bath for the full curing time before using it
- Stick to gentle, non-abrasive cleaners
- Do not leave a chip unrepaired
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
- A cast iron or steel bath that is cracked right through
Send us photos and we’ll tell you honestly.
Materials we work on in High Street
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Do you need bath re-enamelling in High Street?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.
If you can see any of these, send us a photo:
- An old resurfacing that is failing
- Chips and rust in more than one place
- Thin, worn enamel in places
- A coloured bath you want in white
What to look for in a quote
- How long the guarantee is and what it covers
- What aftercare is recommended
- What happens if the damage is worse than the photos show
- Whether a trained technician does the job
Your questions about bath re-enamelling in High Street
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can you re-enamel a roll-top bath?
Yes. Inside and out if you’d like.
How much does bath re-enamelling cost in High Street?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll take it from there.
What happens after I send pictures?
We review the photos and send a fixed quote.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Covering High Street
High Street is about 5 miles south-west of Beccles, in Suffolk. We travel to clients in High Street, so there’s no workshop to go to. We work in 731 places in Suffolk, from the larger towns to small villages.
We work across NR34 and NR35 and the streets around it. Nearby, we also work in Ilketshall St Margaret (1 mile north-west), St Margaret South Elmham (3 miles west), Mettingham (3 miles north), Bungay (4 miles north-west) and Wainford (4 miles north). We also work in nearby towns such as Lowestoft (11 miles north-east), Beccles (5 miles north-east), Diss (15 miles west), Halesworth (4 miles south), Leiston (14 miles south) and Carlton Colville (10 miles east).
Near you in High Street
In High Street, that means homes near Church of St Margaret, among other places. The closest station to High Street is Brampton (Suffolk) station, roughly 2.9 miles east of the centre. Nearby you will also find Wainford Rural District (1.8 miles north) and Ilketshall St John (2.3 miles north). Not far away are Winks Meadow and Homersfield Lake.
Prices and what affects them
Prices start from £350. There’s no area surcharge for High Street. The price reflects:
- How many items we do on one visit
- What kind of damage it is
- What the surface is made of
- The colour and finish to match
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
You can typically get a fixed quote without us visiting. To help us price it:
- Daylight if possible, and no flash reflection
- A photo taken from further back
- Details of any past repairs
- A close-up of the damage, in focus
Email us a picture of the damage and a wider shot of the entire item, with your NR34 postcode, and we will reply with a fixed quote.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes the best part of a day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Related advice
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Places near High Street
More services for High Street
About our accreditations · Every repair comes with a one-year guarantee.
