Suffolk · England
Bath re-enamelling & resurfacing in High Street, Suffolk
Bath re-enamelling in High Street without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- A bath that stays dull however much you clean it
Prices and what affects them
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- The size and number of damaged areas
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
You can take the pictures on your phone. Ensure they show:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
Most customers in High Street get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Bath re-enamelling in High Street, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include a coloured bath you want in white and brown or grey marks that don’t clean off, on acrylic baths, cast iron baths and basins & shower trays.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Where
- High Street (IP17)
- County
- Suffolk
- Cover
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in High Street
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do you come to High Street?
Yes. We cover the entire UK and travel to High Street. Send us photos for a fixed quote, or call 0345 017 0787.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Nearby places to High Street
More services for High Street
Where we work around High Street
High Street is about 15 miles south-west of Lowestoft, in Suffolk. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. High Street is one of 731 places in Suffolk where we work.
Our visits in IP17 work the same way as everywhere else we cover. We also travel to Darsham (1 mile south), Yoxford (2 miles south-west), Middleton Moor (2 miles south), Westleton (2 miles south-east) and Middleton (2 miles south). Within a short drive, we also cover Lowestoft (15 miles north-east), Beccles (12 miles north), Bungay (12 miles north), Halesworth (4 miles north), Leiston (6 miles south) and Carlton Colville (13 miles north-east).
Local landmarks in High Street
Typical jobs here are in homes near The Fox Inn and Church of All Saints and the streets around them. The closest station to High Street is Darsham station, roughly 1 mile south-west of the centre. Well-known places in the area include Dunwich Museum (4 miles east) and Bramfield Castle Yard (1.6 miles north). Not far away are Darsham Marshes.
Common problems we fix in High Street
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
The things customers typically mention when they call include:
- Stains that won’t shift
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- Worn patches where water runs and sits
Questions to ask before booking
- Whether they match the colour on site
- What protection goes down before work starts
- If travel is included in the price
- How to care for the finish
DIY repairs versus a professional job
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Landlords, agents and businesses in High Street
We’re used to working with agents and managing companies. Send the address, photos and access details and we will handle the rest.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
What we do, step by step
We begin by going over the job with you. Then the area is sheeted and masked and we start. You can expect it to take most of the day.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Keep a parking space free if you can
- Clear the area around the damage
- Let us know which floor the room is on
Ask for a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why High Street clients choose us
- Generally one visit, start to finish
- No extra charge for your area
- Rooms protected and left tidy
- Repair technicians who travel to you, UK-wide
Take a look at our pricing and bath cost comparison.
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
