Hampshire · England
Bath re-enamelling & resurfacing in Hightown, Hampshire
Bath re-enamelling in Hightown without the cost of replacing. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coloured bath you want in white
Repair or replace in Hightown?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why choose Surface Doctor in Hightown
- Everything repaired in place
- One visit for most repairs
- Dust sheets down, tidy finish
- Same prices wherever you are
Take a look at our prices page and guide to resurfacing and replacement costs.
Bath re-enamelling in Hightown without replacing anything
Most baths are re-enamelled in a day, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. Our repair technicians work on Victorian roll-tops, basins & shower trays and pressed steel baths, and common reasons people get in touch are a period or roll-top bath worth keeping and staining under the taps and around the waste.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Hightown (BH24)
- Region
- Hampshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Hightown
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- Whether old repairs or coatings need taking off
- The material and finish
- How many items we do on one visit
- The type of damage
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
Phone photos are fine. Ensure they show:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Any details about the material
- Details of any past repairs
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Towns and villages near Hightown
Also in Hightown
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Signs you need bath re-enamelling in Hightown
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Keep an eye out for these signs:
- Several chips and rust patches
- An outdated colour you’d like to change
- A dull, rough surface that will not come clean
- A coating lifting around the plughole
Comparing quotes
- What preparation is included
- Whether the price covers travel
- How long the guarantee is and what it covers
- Whether the price is fixed and includes VAT
Looking after it afterwards
To keep it looking its best:
- Keep suction mats out of the bath
- Wash away dyes and oils after use
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale cannot build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Hightown and nearby
Hightown is about 5 miles south-east of Verwood, in Hampshire. Customers in Hightown get the same service as everywhere else we cover: a fixed quote from pictures, then a visit to do the work. We work in 683 places across Hampshire, from the larger towns to small villages.
Postcode districts we cover here: BH24. Streets in the area include Ashley Close, Forestlake Avenue and Holmwood Garth, and we cover them all. Other places close to Hightown include Crow (1 mile south), Poulner (1 mile north), Ringwood (1 mile north-west), Upper Kingston (1 mile south-west) and Forest Corner (1 mile north-east). We also work in nearby towns such as Totton (12 miles north-east), Lymington (11 miles south-east), New Milton (8 miles south-east), Barton on Sea (8 miles south-east), Dibden Purlieu (15 miles east) and Marchwood (14 miles east).
Near you in Hightown
We visit homes around Ringwood Junior School, The Elm Tree Inn and Ringwood School Academy. Other landmarks nearby include St Leonard's Hospital (4.3 miles south-west). The countryside around Hightown includes Linbrook Lake and Blashford Lakes.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the next day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Ensure the area is dry
- Plan for the room to be out of bounds to pets and children
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
When we would advise against a repair
A repair is not always the answer, and we would rather say so up front. We can’t fix:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Hightown questions
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is a repair better than a new one?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, access to the room.
Do you work in Hightown?
Yes, we do. Technicians travel to Hightown from across the region, with no extra charge for travel.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
