Hampshire · England
Bath Re-enamelling for Hill Brow homes
Full bath re-enamelling and resurfacing at your home in Hill Brow, with a one-year guarantee on every repair.
- Resurfacing from £350
- A roll-top that is seen better days
- A coloured bath you want in white
How we handle bath re-enamelling in Hill Brow
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a bath that stays dull however much you clean it and thin, worn enamel in places, across basins & shower trays, cast iron baths and pressed steel baths.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Location
- Hill Brow (GU33)
- County
- Hampshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- How many areas need work
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- The material
Our prices are the same across the UK, with no extra for Hill Brow. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A picture taken from further back
- The postcode, so we can plan the visit
- Natural light rather than flash
- Any earlier repairs or coatings
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price the same day in most cases.
Towns and villages near Hill Brow
Also in Hill Brow
Different materials, different repairs
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Common questions in Hill Brow
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Hill Brow.
Is there any odour?
There may be a mild smell during the work, which fades afterwards.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
What we cannot put right
A few problems are outside what a surface repair can do:
- A bath split right through the body
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
Repair or replace: which is better?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- One price list for the whole UK
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- Colour mixed on the day to match
Read our full price list and guide to resurfacing and replacement costs.
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
The process
We turn up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Getting a price
Email us pictures of the damage and one of the entire item, and tell us you’re in Hill Brow, and we will reply with a fixed quote.
Read more
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Have chips seen to early
- Never use suction bath mats
- Keep toiletries on a shelf rather than in the bath
- Stick to gentle, non-abrasive cleaners
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
What we are called out for in Hill Brow
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is generally perfectly sound.
Send us a picture if you notice any of these:
- Chips and rust in more than one place
- Stains that will not shift
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
Questions to ask before booking
- Whether cleaning and preparation are in the price
- Who will actually do the work
- What happens if the damage is worse than the photos show
- The length of the guarantee and what it covers
Where we work around Hill Brow
Hill Brow is about 3 miles north-east of Petersfield, in Hampshire. We travel to customers in Hill Brow, so there’s no workshop to go to. Hill Brow is one of 683 places in Hampshire where we work. Our nearest city page is London, about 47 miles away.
We cover every part of the GU33 postcode area and the streets around it. You will find streets such as London Road, Plantation Road and Malvern Road. Hill Brow sits on or near the B2070, so getting to you is simple. Nearby, we also work in Durford Wood (1 mile west), Liss (1 mile north-west), West Liss (1 mile north-west), Rake (1 mile north-east) and The Mint (1 mile north). Larger places within reach include Havant (13 miles south), Horndean (10 miles south-west), Alton (9 miles north-west), Waterlooville (12 miles south-west), Petersfield (3 miles south-west) and Purbrook (13 miles south-west).
What’s near Hill Brow
Typical jobs here are in homes near Whistle Stop pub, Rake Mission Church and Liss Junior School. Hill Brow’s nearest station is Liss station, about 1.1 miles north-west. Nearby you will also find Bear Museum (3.4 miles south-west) and Petersfield Community Hospital (3.5 miles south-west). For a walk, there is Liss Riverside Railway Walk South and Wheatham Hill.
About our accreditations · Every repair comes with a one-year guarantee.
