Hampshire · England
Bath Re-enamelling for Liss Forest homes
Bath re-enamelling in Liss Forest without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- An old resurfacing that is failing

Can I fix it myself?
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Bath re-enamelling at your home in Liss Forest
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the following day. Typical jobs include chips and rust in more than one place and worn patches where water runs and sits, across Victorian roll-tops, basins & shower trays and acrylic baths.
We stand behind the work with a one-year guarantee.

- Where
- Liss Forest (GU33)
- Region
- Hampshire
- Warranty
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. Otherwise, resurfacing generally wins. Prices start from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- No extra charge for your area
- One visit for most repairs
- Colours mixed by hand to suit your surface
- No need to remove anything
Read our prices page and resurfacing vs replacement cost guide.
More services for Liss Forest
Keeping it looking good
It’s all simple stuff:
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
- A quick wipe after use keeps limescale away
- Never use suction bath mats
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Honest limits
We would rather lose a job than do one that will not last, so these are the limits:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Send us pictures and we will tell you honestly before booking.
What we work on
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Landlords, agents and businesses in Liss Forest
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
FAQs for Liss Forest
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
Can a failed resurfacing be redone?
Typically, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Can I add another job to the visit?
Of course, and it usually saves money. Send pictures of everything together and we will quote them together.
How do I get a price for bath re-enamelling in Liss Forest?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo with your GU33 postcode.
What if the damage is worse than the pictures show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
What happens next?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
How it works
Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
How to prepare
- Let us know if it has been repaired before
- Open a window if you can
- Tell us about parking, stairs or access
Ask for a price
If you are in Liss Forest and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
Our work in Liss Forest
Liss Forest is about 4 miles north-east of Petersfield, in Hampshire. Our repair technicians come to clients in Liss Forest and the surrounding area, so you do not need to take anything anywhere. Liss Forest is one of 683 towns and villages in Hampshire where we work. You can also see our page for London, about 46 miles away.
Here we cover the GU33 postcode area. You’ll find streets such as Forest Road, Warren Road and Newfield Road, all of which we cover. Close by, we cover The Mint (1 mile south-east), Liss (1 mile south), West Liss (1 mile south), Greatham (1 mile north) and Rake (1 mile south-east). Larger places within reach include Havant (14 miles south), Fleet (15 miles north), Horndean (11 miles south-west), Aldershot (14 miles north), Alton (8 miles north-west) and Waterlooville (13 miles south-west).
What’s near Liss Forest
In Liss Forest, that means homes near The Temple Inn, St Saviour's and Liss Infant School and the streets around them. The nearest railway station is Liss station, roughly 0.7 miles south-west of the centre. Further afield, we also cover the area around Chase Community Hospital (3.8 miles north) and The Romany Museum (3.7 miles north-west). Not far away are Liss Riverside Railway Walk North and Wheatham Hill.
What we are called out for in Liss Forest
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Send us a photo if you notice any of these:
- Staining under the taps and around the waste
- Enamel that is lost its shine and feels rough
- A bath in a colour that no longer suits
- An old resurfacing that’s failing
Questions to ask before you book
- What preparation is included
- How to look after the finish
- How your room will be protected
- The length of the guarantee and what it covers
About our accreditations · Every repair comes with a one-year guarantee.

