Wiltshire · England
Bath re-enamelling & resurfacing in Hilmarton, Wiltshire
Bath re-enamelling for Hilmarton, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
Bath re-enamelling in Hilmarton, done in place
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s thin, worn enamel in places and chips and rust in more than one place, we can help.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Location
- Hilmarton (SN11)
- Area hub
- Wiltshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Signs you need bath re-enamelling in Hilmarton
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Look out for any of the following:
- Several chips and rust patches
- Staining under the taps and around the waste
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Comparing quotes
- Aftercare advice
- How the colour is matched
- How long the guarantee is and what it covers
- What happens if they find more damage
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Hilmarton. What changes the price is:
- How much damage there is
- Whether old repairs or coatings need taking off
- The type of damage
- The material
A repair is priced on what needs doing, not where you live. You’ll see the full price before you book.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- A wider photo showing the whole bath
- The material, if you know it
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
For a price in Hilmarton, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why Hilmarton customers choose us
- We come to you, anywhere in the UK
- Everything repaired in place
- No extra charge for your area
- We leave the room as we found it
Take a look at our prices page or bath cost comparison.
Nearby places to Hilmarton
What else we do in Hilmarton
Aftercare tips
So the finish stays in good condition:
- Don’t leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What a repair cannot fix
Before booking, it’s worth knowing the limits:
- Leaking taps or wastes (a plumber’s job)
- A cast iron or steel bath that is cracked right through
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
FAQs for Hilmarton
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
What happens after I send pictures?
We review the photos and send a fixed quote and the next dates we have.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Our work in Hilmarton
Hilmarton is about 3 miles north-east of Calne, in Wiltshire. We travel to homes and businesses in Hilmarton, so you don’t need to take anything anywhere. Hilmarton is one of 425 places in Wiltshire where we work. Our jobs stretch from Hilmarton to Birmingham (about 69 miles away).
Our visits in SN11 are booked in the same way as anywhere else. Jobs here include addresses on Church Road, Poynder Place and Swindon Road. Neighbouring places we cover include Goatacre (1 mile north), New Zealand (1 mile north), Compton Bassett (2 miles south-east), Cherhill (3 miles south) and Quemerford (4 miles south). Larger places within reach include Trowbridge (15 miles south-west), Chippenham (7 miles west), Calne (3 miles south-west), Devizes (9 miles south), Melksham (10 miles south-west) and Corsham (10 miles west).
Local landmarks in Hilmarton
Our clients here include homes close to Hilmarton Primary School and Church of St Laurence, among other places. Nearby you’ll also find Atwell-Wilson Motor Museum (3.8 miles south) and Lyneham Clack Mount (2.9 miles north-west). Not far away are Windmill Hill and Great Wood.
How it works
Arrival times are agreed in advance. On site, it takes a full day in most cases. We leave the room clean.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the day after.
How to prepare
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
Getting a price
To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
