Wiltshire · England
Bath re-enamelling & resurfacing in New Zealand, Wiltshire
Fixed-price bath re-enamelling in New Zealand and the surrounding area, normally in one visit.
- Resurfacing from £350
- Several chips and rust patches
- A coating lifting around the plughole
Where we work around New Zealand
New Zealand is about 4 miles north of Calne, in Wiltshire. Across the SN11 area, a technician comes to you. Our repair technicians cover 425 places across Wiltshire. You can also see our page for Birmingham, about 67 miles away.
Every address in SN11 is covered. Other places close to New Zealand include Goatacre (1 mile south-east), Hilmarton (1 mile south), Compton Bassett (4 miles south-east), Cherhill (5 miles south) and Quemerford (5 miles south). Larger places within reach include Chippenham (7 miles south-west), Calne (4 miles south), Devizes (10 miles south), Melksham (11 miles south-west), Corsham (10 miles south-west) and Bradford-on-Avon (15 miles south-west).
Landmarks near New Zealand
Locally, our jobs take us to homes close to Lyneham Primary School and Church of St Michael and All Angels and the streets around them. Nearby you’ll also find Lyneham Clack Mount (1.4 miles north-west). Open spaces near New Zealand include Great Wood.
How we handle bath re-enamelling in New Zealand
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include a peeling or bubbling previous coating and a bath that stays dull however much you clean it, on acrylic baths, pressed steel baths and basins & shower trays.
The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.
- Area
- New Zealand (SN11)
- Area hub
- Wiltshire
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near New Zealand
More services for New Zealand
Landlords, agents and businesses in New Zealand
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
When to call us in New Zealand
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a photo:
- Stains that won’t shift
- A roll-top that is seen better days
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
Comparing quotes
- How changes to the job are handled
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- Whether the colour is mixed to match
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for New Zealand. What changes the price is:
- The type of damage
- How hard the colour is to match
- The size and number of damaged areas
- Where the damage is and how we get to it
We charge the same wherever you are, with no extra for New Zealand. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
You can usually get a fixed quote without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- What it’s made of, if you know
- A coin or ruler next to the damage for scale
Upload photos of the damage and a wider shot of the whole item, and tell us you’re in New Zealand, and we’ll come back with a fixed quote.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Accredited with CHAS, Constructionline and SafeContractor
- One-year guarantee on every repair
- One price list for the entire UK
- Colours mixed by hand to suit your surface
See our full price list and bath cost comparison.
What we do, step by step
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. Allow most of the day, and we’ll keep you posted as we go.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Tell us about parking, stairs or access
Getting a price
For a price in New Zealand, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Have chips seen to early
- Wash away dyes and oils after use
- Fix dripping taps quickly
- Do not use the bath until it has fully cured
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Your questions about bath re-enamelling in New Zealand
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Wiltshire.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
How much does bath re-enamelling cost in New Zealand?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before booking.
Which areas do you work in?
The whole UK, including all of Wiltshire. Send your postcode with your photos and we will confirm dates.
About our accreditations · Every repair comes with a one-year guarantee.
