Devon · England
Bath Re-enamelling for Holemoor homes
Bath re-enamelling in Holemoor without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- Stains that will not shift
How it works
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the following day.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
About our bath re-enamelling in Holemoor
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Our repair technicians work on Victorian roll-tops, acrylic baths and basins & shower trays, and the jobs we see most are a bath that stays dull however much you clean it and a coating lifting around the plughole.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Holemoor (EX22)
- Area hub
- Devon
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What we can’t put right
A repair isn’t always the answer, and we’ll tell you before we start. We cannot fix:
- Plumbing leaks, which need a plumber
- A bath split right through the body
- Acrylic that moves when you stand in it
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Holemoor
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Also near Holemoor
What else we do in Holemoor
Our work in Holemoor
Holemoor is about 13 miles south of Bideford, in Devon. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 586 places across Devon.
Here we cover the EX22 postcode area. Nearby, we also work in New Inn (2 miles north-east), Shebbear (2 miles north-east), Black Torrington (3 miles east), Battledown Cross (3 miles north-east) and Buckland Filleigh (3 miles north-east). Within a short drive, we also cover Bideford (13 miles north), Okehampton (12 miles south-east), East-the-Water (13 miles north), Northam (15 miles north), Westward Ho! (15 miles north) and Great Torrington (10 miles north-east).
Local landmarks in Holemoor
Locally, our jobs take us to homes close to Church of All Saints and Bradford Primary School.
Signs you need bath re-enamelling in Holemoor
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
The most common problems we’re called about are:
- A dull, rough surface that will not come clean
- A coloured bath you want in white
- A coating lifting around the plughole
- Chips and rust in more than one place
Questions to ask before booking
- A fixed quote, and whether VAT is included
- How the room is protected while they work
- How long it needs to cure
- Whether the colour is mixed to match
Landlord and trade work in Holemoor
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Send the address, photos and access details.
How we price bath re-enamelling
Prices start from £350. You will know the full cost before you book. We look at:
- How many items we do on one visit
- The material and finish
- Access to the area
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Quotes from your pictures
Before you send pictures, a few simple things make all the difference:
- Natural light rather than flash
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- What it’s made of, if you know
The quickest way to a price is to send a couple of photos through our quote form or ring us. We will tell you honestly if a repair is the right fix.
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Generally one visit, start to finish
- Fixed prices from your photos
- One price list for the whole UK
- No need to remove anything
Take a look at our prices page and guide to resurfacing and replacement costs.
How to look after the repair
Most damage we see is avoidable. These habits help:
- Store bottles off the bath
- Respect the curing time we give you
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Holemoor: your questions answered
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
How long does re-enamelling last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you repair several things at once?
Of course, and it usually saves money. Send pictures of everything together and you’ll get one combined price.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
About our accreditations · Every repair comes with a one-year guarantee.
