Devon · England
Bath re-enamelling & resurfacing in Shebbear, Devon
Bath re-enamelling in and around Shebbear: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coating lifting around the plughole
Landlords, agents and businesses in Shebbear
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Bath re-enamelling in Shebbear without replacing anything
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. We’re often asked to fix lots of chips and rust spots and a coloured bath you want in white, on Victorian roll-tops, cast iron baths and basins & shower trays.
A one-year guarantee comes as standard.
- Location
- Shebbear (EX21)
- Area hub
- Devon
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- No need to remove anything
- Every repair guaranteed for a year
- Colour mixed on the day to match
- Dust sheets down, tidy finish
Take a look at our full price list and bath cost comparison.
Other services in Shebbear
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to a full day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
How to prepare
- Tell us if there are stairs or a lift
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
Get a quote
Upload a picture of the damage and a wider shot of the whole item, with your EX21 postcode, and we will come back with a fixed quote.
Read more
Common problems we fix in Shebbear
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
People normally call us when they notice something like this:
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
Questions to ask before booking
- Whether a trained technician does the job
- What happens if the damage is worse than the pictures show
- Whether there are any call-out or travel charges
- What aftercare is recommended
How we price bath re-enamelling
Resurfacing from £350. We do not charge extra for travel to Shebbear. The price depends on:
- What the surface is made of
- The colour and finish to match
- How many items we do on one visit
- What kind of damage it is
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your photos
Almost every job we do is priced from pictures. This is what we need:
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Natural light rather than flash
- Whether it’s been repaired or coated before
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Shebbear and nearby
Shebbear is about 11 miles south of Bideford, in Devon. We agree a date that works for you, and you’ll know when to expect us, so there is no waiting around. We work in all 586 towns and villages in Devon.
Every address in EX21 is within our area. Streets in the area include Barn Close, Haycross Hill and Aish Park. Neighbouring places we cover include New Inn (1 mile south-east), Battledown Cross (1 mile east), Buckland Filleigh (1 mile east), Holemoor (2 miles south-west) and Black Torrington (3 miles south-east). Larger places within reach include Bideford (11 miles north), Okehampton (13 miles south-east), Roundswell (15 miles north), East-the-Water (11 miles north), Northam (12 miles north) and Westward Ho! (12 miles north).
Near you in Shebbear
Our clients here include homes close to Shebbear Community School, Church of St Michael and Devil's Stone Inn. Nearby you will also find Alscott Farm Museum (1.6 miles north-east).
Shebbear: your questions answered
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
What areas do you cover?
Everywhere in the UK, Shebbear included. Travel is included in the price.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
What happens once I’ve sent photos?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Do you resurface freestanding baths?
Yes. Inside and out.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Do not use the bath until it has fully cured
- Wash away dyes and oils after use
- Don’t leave a chip unrepaired
- Never use suction bath mats
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Problems we can’t see until an old finish comes off
- Steel that has corroded right through
- Leaks from fittings rather than the bath
Not sure? Send photos and we will give you a straight answer.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
