Stockport · England
Bath Re-enamelling in Hollywood End
Bath re-enamelling in Hollywood End without the cost of replacing. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A period or roll-top bath worth keeping
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Hollywood End. What changes the price is:
- Where the damage is and how we get to it
- How hard the colour is to match
- Previous DIY repairs that have to come out
- How many areas need work
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Send pictures for a quote
Most quotes are done from photos alone. To help us price it:
- A close-up of the damage, in focus
- Natural light rather than flash
- The material, if you know it
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
How we handle bath re-enamelling in Hollywood End
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you’re dealing with brown or grey marks that don’t clean off and a roll-top that’s seen better days, we can typically put it right, on acrylic baths, Victorian roll-tops and cast iron baths alike.
Big or small, it’s backed by a one-year guarantee in Hollywood End and across Stockport.
- Area
- Hollywood End (SK6)
- County
- Stockport
- Warranty
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Hollywood End
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Stockport.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
How quickly can you book me in?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
How do I get a price for bath re-enamelling in Hollywood End?
Resurfacing from £350. Because every job differs, we price from pictures. You’ll get a fixed figure before you book.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Different materials, different repairs
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Where we work around Hollywood End
Hollywood End is about 2 miles north-east of Marple, in Stockport. We visit clients in Hollywood End and the surrounding area, so there is no workshop to go to. Hollywood End is one of 42 towns and villages in Stockport we cover. Our jobs stretch from Hollywood End to Manchester (9 miles away).
Here we cover the SK6 postcode area. Nearby, we also work in Mill Brow (1 mile south-west), Ludworth (1 mile north), Marple Bridge (1 mile west), Compstall (1 mile north-west) and Higher Chisworth (1 mile north-east). Larger places within reach include Stockport (5 miles west), Cheadle Hulme (7 miles west), Burnage (8 miles west), Hazel Grove (4 miles south-west), Bramhall (6 miles south-west) and Reddish (6 miles north-west).
Near you in Hollywood End
Locally, our jobs take us to homes close to The Lane Ends pub, St. Thomas' Church and Mellor Primary School and the streets around them. For rail, the closest station is Marple station, about 1.3 miles west of the centre. Further afield, we also cover the area around Hyde Werneth (2.6 miles north-west) and Clarendon Square Shopping Centre (3.7 miles north-west). Not far away are Werneth Low.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Landlord and trade work in Hollywood End
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Towns and villages near Hollywood End
What else we do in Hollywood End
How to look after the repair
Nothing complicated is needed:
- A dripping tap should be fixed promptly
- Rinse off hair dye, oils and bath bombs immediately
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
What we’re called out for in Hollywood End
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Common reasons people in Hollywood End contact us are:
- Stains that will not shift
- A coloured bath you want in white
- A roll-top that is seen better days
- Several chips and rust patches
Before booking anyone
- Is the price fixed, and does it include VAT?
- How changes to the job are handled
- How your room will be protected
- Aftercare advice
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
How the visit works
You don’t need to empty the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we are doing. It usually takes a full day, and you’re welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the following day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
