Stockport · England
Bath Re-enamelling in Mill Brow
Bath re-enamelling for Mill Brow, without a refit. Send us photos for a fixed quote, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- Enamel that is lost its shine and feels rough
How we handle bath re-enamelling in Mill Brow
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with several chips and rust patches and a peeling or bubbling previous coating, we can normally put it right, on basins & shower trays, pressed steel baths and acrylic baths alike.
A one-year guarantee comes as standard, so you are covered after the visit.
- Location
- Mill Brow (SK6)
- Area hub
- Stockport
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Avoid suction-cup mats
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
- Don’t use the bath until it has fully cured
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Nearby places to Mill Brow
What else we do in Mill Brow
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. Our prices are the same across the UK, with no extra for Mill Brow. What changes the price is the job itself: how much damage, what it’s made of and how many items.
What you get with us
- Straight answers about what a repair can do
- One visit for most repairs
- CHAS and Constructionline accredited
- No extra charge for your area
See our pricing or resurfacing vs replacement cost guide.
When to call us in Mill Brow
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
These are the problems we’re asked about most:
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
- Lots of chips and rust spots
- An original cast iron bath that needs restoring
What your quote should include
- What aftercare is recommended
- How changes to the job are handled
- A fixed quote, and whether VAT is included
- How your room will be protected
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Honest limits
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- A bath that is rusted through
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think.
Materials we work on in Mill Brow
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Landlord and trade work in Mill Brow
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Common questions in Mill Brow
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What happens after I send photos?
You’ll get a fixed quote back, plus dates. There is no obligation to book.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Removing the old finish takes extra time, which we include in the price.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Do you work in Mill Brow?
We do. Repair technicians travel to Mill Brow from across the region, and the price is the same as everywhere else.
The process
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. It usually takes the best part of a day, and you can get on with other things while we’re there.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the day after.
Before we arrive
- Keep a parking space free if you can
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Advice
What affects the price in Mill Brow
Prices start from £350. We don’t charge extra for travel to Mill Brow. The price depends on:
- How hard the colour is to match
- The material
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Send pictures for a quote
Almost every job we do is priced from pictures. This is what to send:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- What it’s made of, if you know
- Something in shot to show the size
If you are in Mill Brow and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
About Mill Brow
Mill Brow is about 2 miles north-east of Marple, in Stockport. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 42 places in Stockport. Our jobs stretch from Mill Brow to Manchester (about 9 miles away).
Jobs in SK6 are booked in the same way as anywhere else. Streets in the area include Mill Brow, Mill Brow Road and Ley Lane, and we cover them all. We also travel to Hollywood End (1 mile north-east), Ludworth (1 mile north), Marple Bridge (1 mile west), Compstall (1 mile north-west) and Higher Chisworth (2 miles north-east). Larger places within reach include Stockport (5 miles west), Cheadle Hulme (7 miles west), Burnage (8 miles west), Hazel Grove (4 miles south-west), Bramhall (6 miles south-west) and Reddish (6 miles north-west).
Around Mill Brow
Around Mill Brow, we work in homes near Mellor Primary School, The Lane Ends pub and Marple Hall School and the streets around them. Other local landmarks include Brabyns Park (1.1 miles west) and St. Thomas' Church (0.5 miles south). The nearest railway station is Marple station, about 1.1 miles west of the centre. Further afield, we also cover the area around Stepping Hill Hospital (4.4 miles west) and Hyde Werneth (2.6 miles north-west). Green spaces nearby include Werneth Low.
About our accreditations · Every repair comes with a one-year guarantee.
