Dudley · England
Bath Re-enamelling in Holy Cross
Local bath re-enamelling for Holy Cross: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- Staining under the taps and around the waste
Bath re-enamelling in Holy Cross without replacing anything
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s an outdated colour you’d like to change and brown or grey marks that don’t clean off, we can typically put it right.
A one-year guarantee comes as standard, so you are not left on your own once we have gone.
- Where
- Holy Cross (DY9)
- County
- Dudley
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Holy Cross
Holy Cross is about 4 miles south of Stourbridge, in Dudley. Whether you are in the middle of Holy Cross or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Our technicians cover all 63 towns and villages across Dudley, from the larger towns to small villages. Our nearest city page is Birmingham, about 10 miles away.
All of DY9 is within our area. That includes homes on Bromsgrove Road, Summerfield Road and Belbroughton Road and the roads around them. Neighbouring places we cover include Clent (1 mile north-east), Lower Clent (1 mile north), Broome (1 mile west), Hagley (1 mile north-west) and Hackman's Gate (2 miles west). Within a short drive, we also cover Dudley (7 miles north), Halesowen (4 miles north-east), Stourbridge (4 miles north), Kingswinford (6 miles north), Sedgley (8 miles north) and Brierley Hill (5 miles north).
Near you in Holy Cross
Locally, our jobs take us to homes close to Hagley Park, Clent Parochial Primary School and Church of St Leonard, among other places. Also close by are The Bell And Cross Public House (under half a mile north-west) and Hagley Catholic High School (1.9 miles north-west). The closest station to Holy Cross is Hagley station, about 1.8 miles north-west of the centre. Other landmarks nearby include Rubery Hill Hospital (4.2 miles east) and Clent Castle (0.6 miles north). For a walk, there is Walton Hill and Chaddesley Woods National Nature Reserve.
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price is based on:
- Access to the area
- Whether old repairs or coatings need taking off
- The type of damage
- How much damage there is
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- A wider photo showing the entire bath
- Where you are, by postcode
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
When we’d advise against a repair
We would rather lose a job than do one that will not last, so these are the limits:
- Leaks from fittings rather than the bath
- A cast iron or steel bath that is cracked right through
- Anything hidden under an old coating, until we remove it
If in doubt, send pictures and we’ll say what we think.
Materials we work on in Holy Cross
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Looking after it afterwards
Simple care helps the repair last. We recommend:
- Keep toiletries on a shelf rather than in the bath
- A quick wipe after use keeps limescale away
- Don’t use the bath until it has fully cured
- Keep suction mats out of the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What we do, step by step
You do not need to empty the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. Most jobs take a full day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Make sure the area is dry
How to get a price
Email us photos of the damage and one of the whole item, with your DY9 postcode, and we’ll come back with a fixed quote.
Related advice
When to call us in Holy Cross
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is typically as strong as ever.
Typical reasons for a call-out include:
- Chips and rust in more than one place
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
Before you book anyone
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
- How your room will be protected
- If travel is included in the price
Work for landlords and builders
Letting agents frequently send us photos straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Your questions about bath re-enamelling in Holy Cross
What happens after I send pictures?
We come back with a fixed price, typically with dates to choose from. There is no obligation to book.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is repairing better than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Nearby places to Holy Cross
Other services in Holy Cross
About our accreditations · Every repair comes with a one-year guarantee.
