Barnsley · England
Bath Re-enamelling for Honeywell homes
Full bath re-enamelling and resurfacing in Honeywell, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Several chips and rust patches
When to call us in Honeywell
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
Send us a photo if you notice any of these:
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- Lots of chips and rust spots
What to look for in a quote
- What prep work is covered
- When it can be used again
- How the colour is matched
- Whether a trained technician does the job
Bath re-enamelling in Honeywell without replacing anything
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Common call-outs are for wear marks under the taps and brown or grey marks that don’t clean off, across Victorian roll-tops, pressed steel baths and cast iron baths.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Honeywell (S70, S71, S75)
- County
- Barnsley
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
About Honeywell
Honeywell is about 1 mile north of Barnsley, in Barnsley. Jobs in Honeywell are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We work in 94 places in Barnsley. Our jobs stretch from Honeywell to Leeds (about 17 miles away).
Jobs in S70, S71 and S75 work the same way as everywhere else we cover. That includes homes on Bond Road, Sykes Avenue and Longman Road and the roads around them. With the A61 close by, Honeywell is simple for us to get to. If you’re just outside Honeywell, we cover Old Town (1 mile north-west), Barnsley (1 mile south), Smithies (1 mile north-east), Shaw Lands (1 mile south-west) and Athersley (1 mile north). We also work in nearby towns such as Wombwell (4 miles south-east), Wath upon Dearne (7 miles south-east), Hoyland (5 miles south), Cudworth (3 miles east), Thurnscoe (7 miles east) and Royston (3 miles north).
Around Honeywell
Locally, our jobs take us to homes close to Locke Park, The Old Number 7 Public House and St Mary's Church, among other places. You will also find Burton Road Primary School (0.5 miles east), Horizon Community College (1.2 miles south-west) and Holgate School (1 mile south-west). The closest station to Honeywell is Barnsley station, about 0.5 miles south of the centre. Further afield, we also cover the area around Barnsley Hospital (0.8 miles west) and Cooper Gallery (0.5 miles south).
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing usually wins. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before booking.
What you get with us
- CHAS and Constructionline accredited
- A fixed quote before booking
- Colour-matched on site
- Honest advice, even when it means no job
See our prices page and bath cost comparison.
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Related advice
Honeywell questions
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Do you come to Honeywell?
We do. We send a technician to Honeywell for every job, and the price is the same as everywhere else.
How do I book?
A close-up, a wider photo and your postcode. Then we will agree a date.
Which areas do you work in?
We cover the whole UK, including Honeywell and the rest of Barnsley. Send your postcode with your pictures and we will confirm dates.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- A dripping tap should be fixed promptly
- Do not leave a chip unrepaired
- Do not let dyes or oils sit on the finish
- A quick wipe after use keeps limescale away
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
When we’d advise against a repair
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
What affects the price in Honeywell
Prices start from £350. We don’t charge extra for travel to Honeywell. The price depends on:
- Access to the area
- How many areas need work
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
How to get a fixed price
Before you send photos, a few simple things make all the difference:
- Natural light rather than flash
- Any details about the material
- A wider photo showing the whole bath
- Your postcode, so we can check dates
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Also in Honeywell
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
