Barnsley · England
Bath Repair in Honeywell
We travel to Honeywell for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A hole punched through by something heavy
- Hairline or through cracks in acrylic
Bath repair in Honeywell, done in place
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. Each is repaired in place. We work on whirlpool & spa baths, acrylic and roll-top & freestanding, and the jobs we see most are a chip where the taps sit and deep scratches in acrylic.
We stand behind the work with a one-year guarantee.
- Location
- Honeywell (S70, S71, S75)
- Region
- Barnsley
- Warranty
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Repairs from £95. Quotes are free and the price is fixed. What we look at:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Access to the area
- How much damage there is
What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- A coin or ruler next to the damage for scale
- A close-up of the damage, in focus
- A wider photo showing the entire bath
- Any earlier repairs or coatings
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Where we work around Honeywell
Honeywell is about 1 mile north of Barnsley, in Barnsley. From the centre of Honeywell to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Honeywell is one of 94 places in Barnsley where we work. Our jobs stretch from Honeywell to Leeds (about 17 miles away).
Here we cover the S70, S71 and S75 postcode area. Streets in the area include Bond Road, Sykes Avenue and Longman Road. You will find Honeywell on the A61, so it’s easy for us to reach. If you’re just outside Honeywell, we cover Old Town (1 mile north-west), Barnsley (1 mile south), Smithies (1 mile north-east), Shaw Lands (1 mile south-west) and Athersley (1 mile north). Larger places within reach include Wombwell (4 miles south-east), Wath upon Dearne (7 miles south-east), Hoyland (5 miles south), Cudworth (3 miles east), Thurnscoe (7 miles east) and Royston (3 miles north).
What’s near Honeywell
Typical jobs here are in homes near Locke Park, The Old Number 7 Public House and St Mary's Church. Nearby too are Burton Road Primary School (0.5 miles east), Horizon Community College (1.2 miles south-west) and Holgate School (1 mile south-west). The closest station to Honeywell is Barnsley station, roughly 0.5 miles south of the centre. Well-known places in the area include Barnsley Hospital (0.8 miles west) and Cooper Gallery (0.5 miles south).
When to call us in Honeywell
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Look out for these signs:
- Deep scratches in acrylic
- Chips caused by builders
- An old repair that has yellowed or come loose
- Rust by the waste and overflow
What your quote should include
- How the colour is matched
- Whether a trained technician does the job
- When it can be used again
- If travel is included in the price
What else we do in Honeywell
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, in much the same way.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.
What you get with us
- Fixed prices from your pictures
- One price list for the whole UK
- Straight answers about what a repair can do
- Colour-matched on site
Take a look at our pricing and bath cost comparison.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
How it works
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the job itself takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the next day.
Getting ready for the visit
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
Ask for a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Honeywell questions
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Do you come to Honeywell?
We do. Repair technicians travel to Honeywell from across the region, with no extra charge for travel.
Can you repair a crack in an acrylic bath?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you cover the entire of Barnsley?
We cover the entire UK, including Honeywell and the rest of Barnsley. Just include your postcode and we will offer you dates.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Honest limits
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Metal that has corroded all the way through
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
Work for landlords and builders
Landlords, letting agents and housing providers in Honeywell use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
