Essex · England
Bath Re-enamelling for Hope End Green homes
Full bath re-enamelling and resurfacing at your home in Hope End Green, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Bath re-enamelling in Hope End Green, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on acrylic baths, pressed steel baths and basins & shower trays, and people most often call us about wear marks under the taps and brown or grey marks that don’t clean off.
All our work is covered by a one-year guarantee, wherever you are in Essex.
- Where
- Hope End Green (CM22)
- Area hub
- Essex
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Hope End Green. The price depends on:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- Where the damage is and how we get to it
- How hard the colour is to match
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your photos
You can typically get a fixed quote without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Where you are, by postcode
- Natural light rather than flash
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Also near Hope End Green
What else we do in Hope End Green
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Fix dripping taps quickly
- Don’t let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
For landlords and businesses
We are used to working with agents and managing companies. Just send pictures, the address and how to get access.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- One visit for most repairs
- Fixed prices from your photos
- Work done at your home or business
- We will tell you if it’s not worth repairing
Read our prices page or guide to resurfacing and replacement costs.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
What we do, step by step
We agree an arrival time beforehand. Once we’re there, the work takes most of the day for most jobs. We leave the room clean and ready to use once it has cured.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the following day.
Preparing for the visit
- Tell us if there are stairs or a lift
- Open a window if you can
- Mention any earlier repairs or resurfacing
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Read more
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Our work in Hope End Green
Hope End Green is about 5 miles east of Bishop's Stortford, in Essex. Whether you are in the middle of Hope End Green or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 644 towns and villages across Essex. Our nearest city page is London, about 30 miles away.
All of CM22 is within our area. Close by, we cover Puttock's End (1 mile south), Smith's Green (1 mile north), Little Canfield (1 mile north-east), Takeley (1 mile north-west) and Hellman's Cross (1 mile south). Further out, we also cover Chelmsford (12 miles south-east), Braintree (12 miles east), Harlow (9 miles south-west), Saffron Walden (11 miles north), Great Dunmow (4 miles east) and Epping (13 miles south-west).
Near you in Hope End Green
Typical jobs here are in homes near Church of All Saints, Lion And Lamb Public House and Takeley Primary School, among other places. The nearest railway station is Stansted Airport station, about 2.1 miles north. A little further out are Little Easton Moat (2.9 miles north-east) and Herts and Essex Hospital (4.5 miles west). Not far away are Portingbury Hills and Rushy Mead.
Your questions about bath re-enamelling in Hope End Green
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
Will there be a smell?
There can be some smell while we work, so we ventilate the room. It fades as everything cures.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
What a repair cannot fix
It helps to know what we cannot do:
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
