Kent · England
Bath Re-enamelling in Hucking
Bath re-enamelling for Hucking, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- An old resurfacing that’s failing
Covering Hucking
Hucking is about 5 miles south-west of Sittingbourne, in Kent. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We cover all 922 towns and villages across Kent. Our jobs stretch from Hucking to London (35 miles away).
Our visits in ME17 are booked in the same way as anywhere else. We also travel to Bicknor (1 mile east), Broad Street (1 mile south-west), Hollingbourne (2 miles south), Wormshill (2 miles east) and Eyhorne Street (2 miles south). Within a short drive, we also cover Maidstone (5 miles west), Ashford (14 miles south-east), Sittingbourne (5 miles north-east), Gravesend (15 miles north-west), Faversham (11 miles east) and Minster (11 miles north-east).
Landmarks near Hucking
We visit homes around Hook and Hatchet pub, Stockbury Hill Wood and Church of St Margaret and the streets around them. The nearest railway station is Hollingbourne station, about 2.1 miles south of the centre. A little further out are KIMS hospital (3.8 miles west) and Leeds Castle (3.2 miles south). Green spaces nearby include Detling Hill.
Bath re-enamelling in Hucking, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Our repair technicians work on cast iron baths, Victorian roll-tops and acrylic baths, and the jobs we see most are brown or grey marks that don’t clean off and thin, worn enamel in places.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Where
- Hucking (ME17)
- County
- Kent
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Hucking
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
The things customers usually mention when they call include:
- Brown or grey marks that do not clean off
- An old resurfacing that is failing
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
Comparing quotes
- How your room will be protected
- Whether cleaning and preparation are in the price
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
Work for landlords and builders
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why us?
- Nothing taken out or refitted
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
Read our prices page and guide to resurfacing and replacement costs.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- Where the damage is and how we get to it
- How many areas need work
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Photographing the damage takes a minute. Please include:
- One sharp close-up of the damage
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Towns and villages near Hucking
Other services in Hucking
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- A bath that’s rusted through
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Questions from Hucking
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there any odour?
Expect a mild smell while we are working, which fades afterwards.
How long does re-enamelling take?
Typically one day, with the bath ready the next day. Deeply pitted baths may need a second day.
What if the damage is worse than the pictures show?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes the best part of a day. We clean up when we’re done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Have somewhere for us to park nearby if possible
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Advice
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
