Isle of Wight · England
Bath Re-enamelling for Hulverstone homes
Bath re-enamelling in and around Hulverstone: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A coloured bath you want in white
How we handle bath re-enamelling in Hulverstone
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We regularly repair acrylic baths, cast iron baths and pressed steel baths, and people most often call us about staining under the taps and around the waste and a coating lifting around the plughole.
We stand behind the work with a one-year guarantee.
- Area
- Hulverstone (PO30)
- County
- Isle of Wight
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
FAQs for Hulverstone
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
What happens once I’ve sent photos?
We come back with a fixed price, usually with dates to choose from. There is no obligation to book.
How long does re-enamelling take?
Generally one day, with the bath ready the day after. A badly pitted bath can need a second day.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Also near Hulverstone
Other services in Hulverstone
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- The type of damage
- Any earlier repairs that need removing first
- Doing more than one item at once
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
How to get a fixed quote
You can usually get a fixed quote without us visiting. To make it quick:
- The material, if you know it
- A photo taken from further back
- Details of any past repairs
- A close-up of the damage, in focus
To get a price, send two or three pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- A bath that’s rusted through
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly before you book.
Materials we work on in Hulverstone
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Do you need bath re-enamelling in Hulverstone?
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is usually as strong as ever.
It’s worth getting a quote if you see:
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- Lots of chips and rust spots
- Staining under the taps and around the waste
Questions to ask before you book
- Whether they match the colour on site
- A fixed quote, and whether VAT is included
- What protection goes down before work starts
- When it can be used again
Covering Hulverstone
Hulverstone is about 7 miles south-west of Newport, in Isle of Wight. Jobs in Hulverstone are booked in like any other job: a fixed price from your photos, then a visit to do the work. We cover all 125 towns and villages in Isle of Wight, from the larger towns to small villages.
Our technicians cover all of the PO30 postcode area and the streets around it. Other places close to Hulverstone include Brookgreen (1 mile south-west), Brook (1 mile west), Dunsbury (1 mile north-west), Shalcombe (1 mile north) and Chilton Green (1 mile south-east). We also work in nearby towns such as Newport (7 miles north-east), Ryde (13 miles east), Cowes (9 miles north-east), Sandown (12 miles east), Shanklin (12 miles east) and Ventnor (11 miles east). For island and remote addresses, call first so we can plan the visit.
Around Hulverstone
Locally, our jobs take us to homes close to St. Mary's Church. Further afield, we also cover the area around Brighstone Village Museum (2 miles east) and Yarmouth Castle (4.6 miles north-west). Green spaces nearby include Westover Down.
What happens on the day
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, do the job and clear up. Allow a full day from start to finish. Before leaving, we tell you when it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Make sure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
Repair or replace in Hulverstone?
A replacement often means several trades over several days. Re-enamelling is one technician, generally one day, with the bath back in use the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Fixed prices from your photos
- Colour-matched on site
- No need to remove anything
- We will tell you if it’s not worth repairing
Take a look at our prices page and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Keep suction mats out of the bath
- Do not use the bath until it has fully cured
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
About our accreditations · Every repair comes with a one-year guarantee.
