Isle of Wight · England
Bath Re-enamelling in Brookgreen
Bath re-enamelling in and around Brookgreen: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Staining under the taps and around the waste
What a repair cannot fix
In fairness, there are a few things a repair will not fix:
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Brookgreen
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
About our bath re-enamelling in Brookgreen
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on Victorian roll-tops, cast iron baths and acrylic baths, and the jobs we see most are a bath that stays dull however much you clean it and a coloured bath you want in white.
All our work comes with a one-year guarantee, wherever you are in Isle of Wight.
- Where
- Brookgreen (PO30)
- County
- Isle of Wight
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Brookgreen
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- An old resurfacing that’s failing
- A bath in a colour that no longer suits
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Before booking anyone
- The length of the guarantee and what it covers
- Aftercare advice
- What happens if the damage is worse than the pictures show
- Whether the price is fixed and includes VAT
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Brookgreen. What changes the price is:
- The type of damage
- Where the damage is and how we get to it
- Doing more than one item at once
- How much damage there is
The price reflects the work involved, not where you live. You will see the full price before booking, with no extras added later.
Getting a price from photos
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- One picture of the whole bath
- Your postcode, so we can check dates
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the next day.
How to prepare
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
Your questions about bath re-enamelling in Brookgreen
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Just add the extra items to your photos and we will quote them together.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How much does bath re-enamelling cost in Brookgreen?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up and a photo of the entire item with your PO30 postcode.
Our work in Brookgreen
Brookgreen is about 7 miles south-west of Newport, in Isle of Wight. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Brookgreen is one of 125 towns and villages in Isle of Wight where we work.
All of PO30 is covered, from the main roads to the quietest streets. We also cover the places around Brookgreen: Brook (1 mile north-west), Hulverstone (1 mile north-east), Dunsbury (1 mile north-west), Chilton Green (1 mile east) and Shalcombe (2 miles north). Larger places within reach include Newport (7 miles north-east), Ryde (13 miles north-east), Cowes (10 miles north-east), Sandown (12 miles east), Shanklin (12 miles east) and Ventnor (11 miles east). If you are somewhere remote, call first so we can plan the visit.
Around Brookgreen
Locally, our jobs take us to homes close to St. Mary's Church. A little further out are Brighstone Village Museum (2.2 miles east) and Yarmouth Castle (4.8 miles north-west). Green spaces nearby include Westover Down.
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Wash away dyes and oils after use
- Avoid suction-cup mats
- Don’t use the bath until it has fully cured
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Repair or replace in Brookgreen?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why us?
- We’ll tell you if it’s not worth repairing
- Typically one visit, start to finish
- A year’s guarantee on all work
- Work done at your home or business
Read our prices page or resurfacing vs replacement cost guide.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Also near Brookgreen
Other services in Brookgreen
About our accreditations · Every repair comes with a one-year guarantee.
