Hampshire · England
Bath re-enamelling & resurfacing in Hunton, Hampshire
Full bath re-enamelling and resurfacing in Hunton, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- A dull, rough surface that won’t come clean
How to look after the repair
Much of the damage we repair could have been avoided. A few tips:
- Rinse off hair dye, oils and bath bombs right away
- Have chips seen to early
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Bath re-enamelling in Hunton, done in place
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s brown or grey marks that don’t clean off and an outdated colour you’d like to change, we can help, on basins & shower trays, Victorian roll-tops and cast iron baths alike.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Where
- Hunton (SO21)
- County
- Hampshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Hunton
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Why book with us
- Most jobs done in one visit
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
See our prices page or resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £350. You will know the full cost before booking. We look at:
- How easy the damage is to reach
- The material and finish
- Whether we combine several jobs
- Previous DIY repairs that have to come out
Our prices are the same across the UK, so there is no premium for Hunton. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- One picture of the entire bath
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- What it’s made of, if you know
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
How it works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s normally ready the next day.
Getting ready for the visit
- Ensure the area is dry
- Tell us about any previous repairs or coatings
- Open a window if you can
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote.
Advice
For landlords and businesses
If you manage property in Hunton, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
About Hunton
Hunton is about 7 miles north of Winchester, in Hampshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. We cover 683 places across Hampshire, from the larger towns to small villages. Our jobs stretch from Hunton to London (about 58 miles away).
We work across the SO21 postcode area and the streets around it. Nearby, we also work in Stoke Charity (1 mile south-east), Egypt (1 mile west), Sutton Scotney (1 mile west), South Wonston (3 miles south) and Barton Stacey (3 miles west). Larger places within reach include Basingstoke (12 miles north-east), Winchester (7 miles south), Eastleigh (13 miles south), Andover (8 miles north-west), Chandler's Ford (12 miles south) and Alton (15 miles east).
Around Hunton
Typical jobs here are in homes near The Wonston Arms and Church of St James, among other places. The nearest railway station is Micheldever station, about 2.9 miles north-east.
Nearby places to Hunton
Also in Hunton
Common problems we fix in Hunton
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted any of these:
- Enamel that is lost its shine and feels rough
- Worn patches where water runs and sits
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
Comparing quotes
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
- How the room is protected while they work
FAQs for Hunton
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
What happens next?
We review the photos and send a fixed quote.
How do I book?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you come to Hunton?
We do. We send a technician to Hunton for every job, with no extra charge for travel.
Is there a call-out fee?
There’s no separate call-out charge. The fixed price covers the visit and the work.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
