Hampshire · England
Bath re-enamelling & resurfacing in Hursley, Hampshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Hursley. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
Bath re-enamelling at your home in Hursley
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on basins & shower trays, acrylic baths and pressed steel baths, and common reasons people get in touch are lots of chips and rust spots and a dull, rough surface that won’t come clean.
We stand behind the work with a one-year guarantee.
- Where
- Hursley (SO21)
- Area hub
- Hampshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- A dripping tap should be fixed promptly
- Don’t let dyes or oils sit on the finish
- Don’t leave a chip unrepaired
- Store bottles off the bath
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Honest limits
A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:
- Problems we cannot see until an old finish comes off
- Acrylic that moves when you stand in it
- Steel that has corroded right through
If in doubt, send pictures and we will say what we think before booking.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Common problems we fix in Hursley
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
If you can see any of these, send us a photo:
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
Before you book anyone
- How the room is protected while they work
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
Repair or replace in Hursley?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Every repair guaranteed for a year
- A fixed quote before booking
- Nothing taken out or refitted
- We come to you, anywhere in the UK
Read our prices page or resurfacing vs replacement cost guide.
Landlord and trade work in Hursley
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Hursley questions
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
How long does re-enamelling take?
One day for most baths, ready the following day. We give you timings with the quote.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before and we will plan for it.
What information do you need?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Plan for the best part of a day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
Prices and what affects them
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- How much damage there is
- Unusual colours or finishes
- What the surface is made of
- Where the damage is and how we get to it
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before booking.
Quotes from your photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- One sharp close-up of the damage
- One picture of the whole bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
About Hursley
Hursley is about 3 miles north of Chandler's Ford, in Hampshire. Whether you are in the middle of Hursley or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 683 towns and villages across Hampshire, from the larger towns to small villages. We work right across the region, from Hursley to London (about 65 miles away).
We work across SO21 and the streets around it. Local streets include Sussex Close, Heathcote Place and Port Lane, and we cover them all. If you’re just outside Hursley, we cover Ladwell (1 mile south), Oliver's Battery (2 miles north-east), Compton (2 miles east), Otterbourne (2 miles south-east) and South Down (2 miles east). Within a short drive, we also cover Winchester (4 miles north-east), Eastleigh (4 miles south-east), Fareham (15 miles south-east), Andover (13 miles north), Totton (9 miles south-west) and Chandler's Ford (3 miles south).
Landmarks near Hursley
Around Hursley, we work in homes near John Keble Church of England Primary School, The King's Head pub and Church of All Saints. The nearest railway station is Shawford station, about 2.7 miles east of the centre. Further afield, we also cover the area around Winchester Castle (3.9 miles north-east) and Royal Hampshire County Hospital (3.6 miles north-east). For a walk, there is Twyford Down and Flexford Nature Reserve.
Nearby places to Hursley
Other services in Hursley
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
About our accreditations · Every repair comes with a one-year guarantee.
