West Sussex · England
Bath re-enamelling & resurfacing in Hurst Wickham, West Sussex
Local bath re-enamelling for Hurst Wickham: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Wear marks under the taps
How we handle bath re-enamelling in Hurst Wickham
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our technicians work on acrylic baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are a bath in a colour that no longer suits and a roll-top that’s seen better days.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Hurst Wickham (BN6)
- Area hub
- West Sussex
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Ensure the area is dry
- Tell us if there are stairs or a lift
- Have somewhere for us to park nearby if possible
Getting a price
For a price in Hurst Wickham, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
What a repair can’t fix
A repair is not always the answer, and we will tell you before we start. Repairs will not solve:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
Hurst Wickham and nearby
Hurst Wickham is about 2 miles south-west of Burgess Hill, in West Sussex. Wherever you are in the BN6 postcode area, we come to you. Hurst Wickham is one of 371 places in West Sussex where we work. Our nearest city page is London, about 39 miles away.
Every address in BN6 is covered. You’ll find streets such as College Lane, Hurst Wickham Close and Belmont Lane. Neighbouring places we cover include Hurstpierpoint (1 mile west), Hassocks (1 mile south-east), Keymer (1 mile south-east), Clayton (2 miles south-east) and Sayers Common (2 miles north-west). We also work in nearby towns such as Crawley (12 miles north), Horsham (11 miles north-west), Worthing (13 miles south-west), Haywards Heath (5 miles north-east), East Grinstead (15 miles north-east) and Shoreham-by-Sea (8 miles south-west).
Landmarks near Hurst Wickham
Our clients here include homes close to St Lawrence CofE Primary School, Church of St George and Downlands Community School and the streets around them. The closest station to Hurst Wickham is Hassocks station, about 1 mile south-east. A little further out are Clayton Castle (1.9 miles south) and The Budding Foundation Museum of Gardening (1 mile south-east). Green spaces nearby include Wolstonbury Hill and Bedelands Farm Nature Reserve.
Landlords, agents and businesses in Hurst Wickham
We carry out planned and one-off repairs for housing associations and facilities teams in West Sussex and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
If you manage property in Hurst Wickham, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Towns and villages near Hurst Wickham
Other services in Hurst Wickham
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Common problems we fix in Hurst Wickham
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, generally first under the taps and around the waste.
Keep an eye out for these signs:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Enamel that is lost its shine and feels rough
- Stains that will not shift
What to look for in a quote
- Whether there are any call-out or travel charges
- A fixed price, and whether VAT is included
- How changes to the job are handled
- What prep work is covered
Common questions in Hurst Wickham
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How do I get a price for bath re-enamelling in Hurst Wickham?
Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why Hurst Wickham customers choose us
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
- Straight answers about what a repair can do
- A year’s guarantee on all work
Read our full price list and guide to resurfacing and replacement costs.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Hurst Wickham. What changes the price is:
- The material
- Doing more than one item at once
- How much damage there is
- Whether it’s a chip, crack, burn or wear
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Send photos for a quote
Phone pictures are fine, there’s no need for anything special. Just ensure we can see:
- Your postcode, so we can check dates
- A photo taken from further back
- A coin beside the damage so we can judge size
- What it’s made of, if you know
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
