West Sussex · England
Bath re-enamelling & resurfacing in Keymer, West Sussex
Damaged bath in Keymer? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- An old resurfacing that is failing
About our bath re-enamelling in Keymer
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. We are frequently asked to fix a bath that stays dull however much you clean it and worn patches where water runs and sits, on pressed steel baths, acrylic baths and cast iron baths.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Keymer (BN6)
- Region
- West Sussex
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day from start to finish. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
- Keep pets and children out of the room while we work
Getting a price
Send us a photo of the damage and a wider shot of the whole item, and tell us you are in Keymer, and we will reply with a fixed price.
Related advice
About Keymer
Keymer is about 2 miles south of Burgess Hill, in West Sussex. Jobs in Keymer are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We cover all 371 towns and villages across West Sussex. You can also see our page for London, about 40 miles away.
Jobs in BN6 work the same way as everywhere else we cover. Local streets include Flowers Close, The Quadrant and Kymer Gardens. Nearby, we also work in Hassocks (1 mile west), Ditchling (1 mile east), Clayton (1 mile south-west), Hurst Wickham (1 mile north-west) and Westmeston (2 miles south-east). We also work in nearby towns such as Crawley (13 miles north), Horsham (13 miles north-west), Worthing (14 miles south-west), Haywards Heath (5 miles north), East Grinstead (15 miles north) and Shoreham-by-Sea (8 miles south-west).
What’s near Keymer
Typical jobs here are in homes near Downlands Community School, The Windmills Junior School and St Cosmas and St Damian Church. Keymer’s nearest station is Hassocks station, about 0.5 miles west of the centre. Nearby you’ll also find The Dene Hospital (3.2 miles north-west) and Clayton Castle (1.2 miles south-west). The countryside around Keymer includes Ditchling Beacon and Bedelands Farm Nature Reserve.
What we cannot put right
We’ll always be straight with you, so here’s what a repair will not do:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Landlords, agents and businesses in Keymer
For anyone letting property in or around Keymer, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
What affects the price in Keymer
Resurfacing from £350. You won’t pay by the hour. The price is based on:
- The size and number of damaged areas
- The type of damage
- Whether we combine several jobs
- The colour and finish to match
Our prices are the same across the UK, so there’s no premium for Keymer. What changes the price is the job itself: the material, the amount of damage and how many items.
Send photos for a quote
We price nearly every job from pictures. This is what to send:
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
What we are called out for in Keymer
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The most common problems we’re called about are:
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- A bath that stays dull however much you clean it
What to look for in a quote
- How the room is protected while they work
- When it can be used again
- A fixed price, and whether VAT is included
- What happens if the damage is worse than the pictures show
Questions from Keymer
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you work in Keymer?
Yes, we do. Repair technicians travel to Keymer from across the region, with no extra charge for travel.
How much does bath re-enamelling cost in Keymer?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed quote without visiting.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Nearby places to Keymer
Also in Keymer
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs straight away
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Repair or replace in Keymer?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- We leave the room as we found it
- Nothing taken out or refitted
Take a look at our full price list or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
