Tameside · England
Bath re-enamelling & resurfacing in Hyde, Tameside
Bath re-enamelling for Hyde, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- An outdated colour you’d like to change
- Wear marks under the taps
Bath re-enamelling in Hyde, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. If you’re dealing with a bath that stays dull however much you clean it and a coating lifting around the plughole, we can help.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back.
- Area
- Hyde (SK14, SK16)
- Region
- Tameside
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Aftercare tips
To keep it looking its best for years:
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Wash away dyes and oils after use
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
How we price bath re-enamelling
Prices start from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Doing more than one item at once
- Any earlier repairs that need removing first
- How hard the colour is to match
- How much damage there is
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Where you are, by postcode
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Our work in Hyde
Hyde is about 5 miles north-east of Stockport, in Tameside. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Our technicians cover all 32 towns and villages across Tameside, from the larger towns to small villages. Our jobs stretch from Hyde to Manchester (6 miles away).
Jobs in SK14 and SK16 work the same way as everywhere else we cover. From Market Street, High Street and Station Road or anywhere nearby, a technician can come to you. Hyde is on the A57 and A560, which makes it straightforward to reach. We also cover the places around Hyde: Flowery Field (1 mile north-west), Newton (1 mile north-west), Gee Cross (1 mile south), Newton Wood (1 mile north-west) and Backbower (2 miles south). Within a short drive, we also cover Ashton-under-Lyne (3 miles north), Stalybridge (3 miles north-east), Droylsden (4 miles north-west), Audenshaw (3 miles north-west), Hurst (3 miles north) and Mossley (5 miles north). As one of the bigger places in Tameside, Hyde is somewhere we visit often.
Near you in Hyde
We visit homes around Olde Town House, Hyde Park and Endeavour Primary Academy, among other places. You will also find Hyde High School (0.7 miles north-west) and Church of St Thomas (within half a mile south-east). Hyde has its own railway station: Newton for Hyde station. A little further out are Portland Basin Museum (2.4 miles north-west) and Tameside General Hospital (2.9 miles north). Open spaces near Hyde include Werneth Low and Eastwood Nature Reserve.
- Other local spots include Hyde Newton (0.6 miles north)
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. Most visits take a full day, including clearing up.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Make sure the area is dry
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Advice
When we would advise against a repair
In fairness, some problems need a different fix:
- A bath split right through the body
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send photos and we will give you a straight answer.
What we work on
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- One visit for most repairs
- Fixed prices from your photos
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
Take a look at our full price list and guide to resurfacing and replacement costs.
Nearby places to Hyde
More services for Hyde
Landlord and trade work in Hyde
We carry out planned and one-off repairs for housing associations and facilities teams in Tameside and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Your questions about bath re-enamelling in Hyde
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Can you price it without visiting?
Generally, yes. Clear photos let us give you a fixed price without visiting.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
What happens after I send pictures?
We come back with a fixed quote. You are under no obligation.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Do you charge for travel?
We don’t add a call-out fee. Your fixed price includes everything.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
About our accreditations · Every repair comes with a one-year guarantee.
