Warwickshire · England

Bath Re-enamelling for Ingon homes

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Ingon. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Ingon?

Bath re-enamelling in Ingon, done in place

When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. Our repair technicians work on cast iron baths, pressed steel baths and basins & shower trays, and common reasons people get in touch are a coloured bath you want in white and a roll-top that’s seen better days.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Roll-top bath being refinished by a Surface Doctor technician
Location
Ingon (CV37)
County
Warwickshire
Guarantee
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026

Honest limits

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Anything hidden under an old coating, until we remove it
  • An acrylic bath that flexes badly underfoot
  • Leaks from fittings rather than the bath

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Ingon

  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays

Prices and what affects them

Prices start from £350. You will not pay by the hour. The price depends on:

  • The material
  • The type of damage
  • Doing more than one item at once
  • How hard the colour is to match

Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Quotes from your photos

Photographing the damage takes a minute. Please include:

  • Any details about the material
  • Any earlier repairs or coatings
  • One sharp close-up of the damage
  • Daylight if possible, and no flash reflection

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

How the visit works

Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the following day.

How to prepare

  • Ensure the area is dry
  • Let us know about parking or access
  • Move bottles, mats and clutter away from the area

Get a quote

For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send pictures for a quote

Read more

Landlords, agents and businesses in Ingon

Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Different materials, different repairs

Pressed steel

Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Ingon and the surrounding area

Ingon is about 2 miles north-east of Stratford-upon-Avon, in Warwickshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 324 places in Warwickshire, from the larger towns to small villages. You can also see our page for Birmingham, about 20 miles away.

We cover every part of CV37 and the streets around it. Nearby, we also work in Alveston (1 mile south-east), Snitterfield (2 miles north), Black Hill (2 miles north-east), Heath End (2 miles north-east) and Hampton Lucy (2 miles east). Further out, we also cover Warwick (7 miles north-east), Royal Leamington Spa (9 miles north-east), Leamington Spa (8 miles north-east), Kenilworth (10 miles north-east), Southam (13 miles east) and Alcester (8 miles west).

What’s near Ingon

Locally, our jobs take us to homes close to Bancroft Gardens, King Edward VI School and Former Parish Church Of St James, among other places. The nearest railway station is Stratford-upon-Avon station, about 1.8 miles south-west. Further afield, we also cover the area around Old Red Lion Shopping Centre (1.6 miles south-west) and Stratford Hospital (1.7 miles south-west).

  • Parks and local facilities nearby include Old Stratford and Drayton (2.8 miles west)
Map of Ingon © OpenStreetMap contributors

Repair or replace in Ingon?

Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • Honest advice, even when it means no job
  • Colour-matched on site
  • Free fixed quotes from pictures
  • We come to you, anywhere in the UK

Read our prices page and bath cost comparison.

Keeping it looking good

After the repair has cured, a few habits help it last:

  • A quick wipe after use keeps limescale away
  • Leave the bath for the full curing time before using it
  • Don’t leave a chip unrepaired
  • Do not leave bottles, razors or sponges standing on the surface

The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

Ingon: your questions answered

Can you redo someone else’s repair?

In most cases. We remove the old repair before doing a new one.

What happens next?

We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Can landlords book you?

Yes. We work for landlords, agents, builders and businesses as well as homeowners.

Do you cover Ingon?

Yes. We work across the UK and travel to Ingon and the rest of Warwickshire. Send photos and we will quote, or call 0345 017 0787.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.

Can you do more than one item on the same visit?

Of course, and it normally saves money. Just add the extra items to your photos and you will get one combined price.

Do you need bath re-enamelling in Ingon?

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.

Most people get in touch after spotting something like this:

  • Worn patches where water runs and sits
  • A bath in a colour that no longer suits
  • Chips and rust in more than one place
  • A bath that stays dull however much you clean it

What to look for in a quote

  • Whether they match the colour on site
  • Whether the price covers travel
  • What the guarantee covers, and for how long
  • A fixed quote, and whether VAT is included

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.