County Durham · England
Bath re-enamelling & resurfacing in Inkerman, County Durham
We travel to Inkerman for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- Staining under the taps and around the waste
What we’re called out for in Inkerman
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.
Common reasons people in Inkerman contact us are:
- A period or roll-top bath worth keeping
- Several chips and rust patches
- Stains that won’t shift
- Enamel that’s lost its shine and feels rough
What to look for in a quote
- A fixed price, and whether VAT is included
- Whether the price covers travel
- How your room will be protected
- Whether a trained technician does the job
Bath re-enamelling in Inkerman without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We regularly repair basins & shower trays, cast iron baths and pressed steel baths, and the jobs we see most are wear marks under the taps and a coating lifting around the plughole.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Inkerman (DL13)
- Region
- County Durham
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Inkerman
Can you fix a peeling bath coating?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Inkerman.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is there any odour?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.
Is a repair better than a new one?
Generally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
About Inkerman
Inkerman is about 7 miles south of Consett, in County Durham. Jobs in Inkerman are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Inkerman is one of 329 places in County Durham we cover. You can also see our page for Newcastle upon Tyne, about 18 miles away.
We work across DL13. We regularly work on streets such as Inkerman Road and North Road and the roads around them. Other places close to Inkerman include Tow Law (1 mile south-east), Thornley (2 miles south), Satley (2 miles north), Wolsingham (3 miles south-west) and Craigside (3 miles south). Within a short drive, we also cover Durham (10 miles east), Consett (7 miles north), Newton Aycliffe (14 miles south-east), Bishop Auckland (9 miles south-east), Spennymoor (10 miles south-east) and Chester-le-Street (12 miles north-east).
What’s near Inkerman
Locally, our jobs take us to homes close to Church of St Philip and St James and Blessed John Duckett Roman Catholic Voluntary Aided Primary, among other places. The countryside around Inkerman includes Stanley Moss.
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
- Plumbing leaks, which need a plumber
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Inkerman
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Re-enamelling renews the whole surface without moving it. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Inkerman
- CHAS, Constructionline and SafeContractor accredited
- One-year guarantee on every repair
- We will tell you if it’s not worth repairing
- Generally one visit, start to finish
See our full price list or resurfacing vs replacement cost guide.
Keeping it looking good
How the surface is treated afterwards matters:
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs straight away
- Fix dripping taps quickly
- Do not use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
Places near Inkerman
Also in Inkerman
How it works
Visits start with a quick look at the job together. Then the area is sheeted and masked and we start. You can expect it to take a full day.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know which floor the room is on
- Clear the area around the damage
- Make sure the room can be ventilated
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
Landlords, agents and businesses in Inkerman
Landlords, letting agents and housing providers in Inkerman use us as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
What affects the price in Inkerman
Resurfacing from £350. There’s no charge for travel to Inkerman. The price comes down to:
- How easy the damage is to reach
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- What kind of damage it is
Our prices are the same across the UK, so there’s no premium for Inkerman. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your pictures
When you take your pictures, a few simple things make all the difference:
- A coin beside the damage so we can judge size
- A photo taken from further back
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
Send us a picture of the damage and one of the entire item, and tell us you’re in Inkerman, and we’ll come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
