County Durham · England
Bath Re-enamelling for Tow Law homes
Full bath re-enamelling and resurfacing in Tow Law, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A bath in a colour that no longer suits
About our bath re-enamelling in Tow Law
Resurfacing renews the entire surface of the bath without a refit. It’s the answer when the whole bath is tired rather than one spot. Typical jobs include a period or roll-top bath worth keeping and worn patches where water runs and sits, across cast iron baths, basins & shower trays and pressed steel baths.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Tow Law (DL13)
- Region
- County Durham
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
Much of the damage we repair could have been avoided. These habits help:
- Don’t use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Don’t leave bottles, razors or sponges standing on the surface
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Prices start from £350. A repair is priced on what needs doing, not where you live. The full price is agreed before booking, with no extras added later.
Why choose Surface Doctor in Tow Law
- Same prices wherever you are
- One-year guarantee on every repair
- Repair technicians who travel to you, UK-wide
- We will tell you if it’s not worth repairing
Take a look at our full price list and guide to resurfacing and replacement costs.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Towns and villages near Tow Law
Other services in Tow Law
FAQs for Tow Law
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Will the price change on the day?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before booking. We take into account:
- The size and number of damaged areas
- What kind of damage it is
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- Any earlier repairs or coatings
- One picture of the entire bath
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
What we do, step by step
Your technician turns up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
- Tell us if there are stairs or a lift
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Advice
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
When we would advise against a repair
Before booking, it’s worth knowing the limits too:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
If in doubt, send photos and we will say what we think before you book.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Tow Law and nearby
Tow Law is about 8 miles south of Consett, in County Durham. Anywhere in DL13, we carry out the work at your property. We work in 329 places across County Durham. You can also see our page for Newcastle upon Tyne, about 18 miles away.
Here we cover the DL13 postcode area. Local streets include High Street, Castle Bank and Grove Road, and we cover them all. You will find Tow Law on the A68 and B6297, which makes it straightforward to reach. Other places close to Tow Law include Inkerman (1 mile north-west), Thornley (1 mile south), Craigside (2 miles south), Satley (3 miles north) and Wolsingham (3 miles west). Further out, we also cover Durham (10 miles east), Consett (8 miles north), Newton Aycliffe (13 miles south-east), Bishop Auckland (8 miles south-east), Spennymoor (9 miles east) and Chester-le-Street (12 miles north-east).
Local landmarks in Tow Law
Our clients here include homes close to Church of St Philip and St James and Blessed John Duckett Roman Catholic Voluntary Aided Primary. The countryside around Tow Law includes Stanley Moss.
About our accreditations · Every repair comes with a one-year guarantee.
