Highland · Scotland

Bath re-enamelling & resurfacing in Inverasdale, Highland

Bath re-enamelling for Inverasdale, without a refit. Get a fixed price from your photos, then we come to you.

  • Resurfacing from £350
  • Brown or grey marks that do not clean off
  • A coating lifting around the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Inverasdale?

How the visit works

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we’re doing. It generally takes most of the day, and you’re welcome to carry on with your day while we work.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

How to prepare

  • Keep children and pets away from the room on the day
  • Make sure the room can be ventilated
  • Avoid using the area for a few hours before we arrive

Getting a price

Send us a photo of the damage and a wider shot of the entire item, with your IV22 postcode, and we’ll reply with a fixed price.

Send photos for a quote

Related advice

Bath re-enamelling at your home in Inverasdale

When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s a bath that stays dull however much you clean it and stains that won’t shift, we can help, on cast iron baths, pressed steel baths and Victorian roll-tops alike.

Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.

Area
Inverasdale (IV22)
County
Highland
Guarantee
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Covering Inverasdale

Inverasdale is in Highland. We visit clients in Inverasdale, so you do not need to take anything anywhere. Inverasdale is one of 253 towns and villages in Highland we cover.

Postcode districts we cover here: IV22. Inverasdale is on the B8057, which makes it straightforward to reach. If you’re just outside Inverasdale, we cover Àird (3 miles north-east), Aultbea (4 miles north-east), Poolewe (4 miles south-east), Gairloch (6 miles south) and Laide (6 miles north-east). For island and remote addresses, ring us first and we’ll plan the trip.

Local landmarks in Inverasdale

Typical jobs here are in homes near Inverasdale Free Church Of Scotland. Nearby you will also find Arctic Convoy Museum (3.9 miles north-east). The countryside around Inverasdale includes Loch Sguod and Cnoc Breac.

Map of Inverasdale © OpenStreetMap contributors

What we’re called out for in Inverasdale

Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is normally as strong as ever.

It’s worth getting a quote if you see:

  • A dull, rough surface that won’t come clean
  • Lots of chips and rust spots
  • Stains that will not shift
  • A bath in a colour that no longer suits

What to look for in a quote

  • What happens if the damage is worse than the photos show
  • How to care for the finish
  • What protection goes down before work starts
  • Whether there are any call-out or travel charges

How to compare quotes

Prices and what affects them

Prices start from £350. There’s no area surcharge for Inverasdale. The price reflects:

  • Previous DIY repairs that have to come out
  • The type of damage
  • What the surface is made of
  • The colour and finish to match

A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book.

Send photos for a quote

Phone photos are fine, there is no need for anything special. Just make sure we can see:

  • Any details about the material
  • One picture of the entire bath
  • Any earlier repairs or coatings
  • Your postcode, so we can check dates

To get a price, send two or three pictures through our quote form or ring us. We will say immediately if a repair is the right fix.

When a repair isn’t the answer

We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:

  • Leaking taps or wastes (a plumber’s job)
  • A bath that is rusted through
  • An acrylic bath that flexes badly underfoot

Not sure? Send photos and we will give you a straight answer before booking.

Surfaces we repair

  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

Keeping it looking good

Aftercare is simple:

  • Store bottles off the bath
  • A dripping tap should be fixed promptly
  • Avoid suction-cup mats
  • Get any chip repaired quickly

Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.

Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.

Work for landlords and builders

We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.

Inverasdale: your questions answered

Does the bath have to be removed?

No. We resurface it in place, so the tiles and taps stay put.

Can you redo someone else’s repair?

Yes, regularly. It can add a little time, which we include in the quote.

Do I need to be at home?

Yes. We need access to the room while we work, at a time that suits you.

Will there be fumes?

A little, during the work. We set up ventilation and the smell fades as it cures.

Can you quote from pictures?

In nearly every case. If pictures don’t show enough, we’ll ask for another angle.

When can you do it?

We will give you dates with your quote. Tell us if you need it done quickly.

Do the materials smell?

There can be some smell while we work. It fades as everything cures.

Can tenants book a repair?

Yes. Ask your landlord first, and we can send them the quote if that helps.

What your bath is made of matters

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.