Nottinghamshire · England
Bath re-enamelling & resurfacing in Ironville, Nottinghamshire
Fixed-price bath re-enamelling in Ironville and the surrounding area, generally in one visit.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A roll-top that is seen better days
Repair or replace in Ironville?
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the day after. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why us?
- No need to remove anything
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- Usually one visit, start to finish
Read our pricing and resurfacing vs replacement cost guide.
Bath re-enamelling at your home in Ironville
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our technicians work on basins & shower trays, pressed steel baths and cast iron baths, and people most often call us about a dull, rough surface that won’t come clean and several chips and rust patches.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Ironville (NG16)
- County
- Nottinghamshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Ironville
We regularly work with letting and managing agents. Just send pictures, the address and how to get access.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
How the visit works
Your technician turns up when we said we would, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take the best part of a day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the following day.
Before we arrive
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Clear toiletries, mats and anything else from around the area
How to get a price
If you’re in Ironville and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
Questions from Ironville
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
How quickly can you book me in?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
What happens once I’ve sent pictures?
You’ll get a fixed quote back. There is no obligation to book.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Aftercare tips
It’s all simple stuff:
- Stick to gentle, non-abrasive cleaners
- Leave the bath for the full curing time before using it
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
What we’re called out for in Ironville
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Look out for any of the following:
- A dull, rough surface that won’t come clean
- An outdated colour you’d like to change
- Stains that will not shift
- Lots of chips and rust spots
What to look for in a quote
- Whether the colour is mixed to match
- Whether there are any call-out or travel charges
- How long it needs to cure
- How changes to the job are handled
Nearby places to Ironville
Also in Ironville
How we price bath re-enamelling
Prices start from £350. You will know the full cost before booking. We take into account:
- How easy the damage is to reach
- Unusual colours or finishes
- The material
- What kind of damage it is
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send pictures for a quote
Good photos mean an accurate price. Here’s what helps:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- One picture of the whole bath
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and no obligation.
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Ironville and the surrounding area
Ironville is about 2 miles east of Ripley, in Nottinghamshire. Anywhere in NG16, we carry out the work at your property. Our technicians cover all 329 towns and villages across Nottinghamshire. We work right across the region, from Ironville to Manchester (46 miles away).
Our technicians cover all of NG16. Whether you live on Market Place, Market Street and Station Road or anywhere nearby, we can come to you. Close by, we cover Pye Hill (1 mile east), Jacksdale (1 mile east), Pye Bridge (1 mile north), Golden Valley (1 mile west) and Westwood (1 mile east). Within a short drive, we also cover Mansfield (9 miles north-east), Beeston (11 miles south-east), Carlton (12 miles south-east), Sutton in Ashfield (6 miles north-east), Hucknall (6 miles east) and West Bridgford (13 miles south-east).
Local landmarks in Ironville
We visit homes around New Inn, Selston Arts and Community College and Ironville and Codnor Primary School. For rail, the closest station is Alfreton station, about 2.9 miles north of the centre. Further afield, we also cover the area around John King Workshop Museum (2.5 miles north-east) and Ripley Hospital (2.7 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
