Nottinghamshire · England
Bath re-enamelling & resurfacing in Westwood, Nottinghamshire
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Westwood. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Staining under the taps and around the waste
- A roll-top that is seen better days
Bath re-enamelling in Westwood without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our repair technicians work on Victorian roll-tops, cast iron baths and acrylic baths, and common reasons people contact us are a dull, rough surface that won’t come clean and an original cast iron bath that needs restoring.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Location
- Westwood (NG16)
- Area hub
- Nottinghamshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Keeping it looking good
So the finish stays in good condition for years:
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
Why us?
- Straight answers about what a repair can do
- CHAS and Constructionline accredited
- We leave the room as we found it
- One visit for most repairs
See our pricing or resurfacing vs replacement cost guide.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Questions from Westwood
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Do you work in Westwood?
Yes, we do. We send a technician to Westwood for every job, with no extra charge for travel.
Do you cover the whole of Nottinghamshire?
The whole UK, including all of Nottinghamshire. Send your postcode with your photos and we will offer you dates.
Are there extra charges for Westwood?
Travel is included in the price, with the same prices everywhere we work.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How the visit works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow a full day, and we will tell you if anything changes.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
- Open a window if you can
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Read more
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
About Westwood
Westwood is about 3 miles north of Heanor, in Nottinghamshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 329 places across Nottinghamshire. You can also see our page for Birmingham, about 47 miles away.
Postcode districts we cover here: NG16. You will find streets such as Cheshire Way, Cumberland Close and Rutland Road, all of which we cover. Nearby, we also work in Jacksdale (1 mile west), Pye Hill (1 mile west), Ironville (1 mile west), Bagthorpe (1 mile east) and Pye Bridge (1 mile north-west). We also work in nearby towns such as Mansfield (8 miles north-east), Beeston (10 miles south-east), Carlton (12 miles south-east), Sutton in Ashfield (5 miles north-east), Hucknall (5 miles east) and West Bridgford (13 miles south-east).
Landmarks near Westwood
Typical jobs here are in homes near Westwood Infant and Nursery School, St Mary's Church and Selston Arts and Community College, among other places. For rail, the closest station is Langley Mill station, about 2.9 miles south. Further afield, we also cover the area around Codnor Castle (1.5 miles south-west) and Designer Outlet East Midlands (3.3 miles north).
Also in Westwood
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair won’t do:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think before you book.
What we work on
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Common problems we fix in Westwood
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Keep an eye out for these signs:
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
- Stains that will not shift
- Worn patches where water runs and sits
Comparing quotes
- How to care for the finish
- How long it needs to cure
- How the colour is matched
- What prep work is covered
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
