Cheshire West and Chester · England
Bath re-enamelling & resurfacing in Kelsall, Cheshire West and Chester
Fixed-price bath re-enamelling in Kelsall and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Worn patches where water runs and sits
- Several chips and rust patches
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
How we handle bath re-enamelling in Kelsall
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. Whether it’s a coating lifting around the plughole and an original cast iron bath that needs restoring, we can usually put it right, on Victorian roll-tops, pressed steel baths and acrylic baths alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Kelsall (CW6)
- Region
- Cheshire West and Chester
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Kelsall
Kelsall is about 7 miles east of Chester, in Cheshire West and Chester. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Kelsall is one of 224 towns and villages in Cheshire West and Chester we cover. Our nearest city page is Liverpool, about 16 miles away.
Our visits in CW6 work the same way as everywhere else we cover. You will find streets such as Thistle Close, Church Street and Chester Road, all of which we cover. We also travel to Ashton Hayes (1 mile north-west), Tarvin Sands (2 miles west), Mouldsworth (2 miles north-west), Manley (2 miles north-west) and Manley Common (2 miles north). We also work in nearby towns such as Chester (7 miles west), Ellesmere Port (10 miles north-west), Winsford (8 miles east), Northwich (9 miles north-east), Neston (15 miles west) and Boughton (7 miles west).
Near you in Kelsall
Typical jobs here are in homes near The Oak pub, Kelsall Primary School and Black Lake Nature Reserve, among other places. The nearest railway station is Mouldsworth station, about 1.9 miles north-west of the centre. Nearby you’ll also find Horton-cum-Peel (1.9 miles north-west) and Mouldsworth Motor Museum (2.1 miles north-west). Not far away are Hockenhull Platts.
Repair or replace: which is better?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. We charge the same wherever you are, so there is no premium for Kelsall. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Honest advice, even when it means no job
- Most jobs done in one visit
- Every repair guaranteed for a year
- Fixed prices from your photos
Take a look at our pricing and bath cost comparison.
FAQs for Kelsall
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you fix a peeling bath coating?
Usually, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and you’ll get one combined price.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
When a repair isn’t the answer
A repair isn’t right for every job, for example:
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
- A bath that is rusted through
Send us pictures and we’ll tell you honestly.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Prices and what affects them
Resurfacing from £350. We don’t charge extra for travel to Kelsall. The price depends on:
- How easy the damage is to reach
- The colour and finish to match
- Whether we combine several jobs
- The material and finish
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
When you take your photos, these tips help us give you a firm price:
- The postcode, so we can plan the visit
- Details of any past repairs
- A photo taken from further back
- A clear, close picture of the problem area
To get a price, send a couple of photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Also near Kelsall
What else we do in Kelsall
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How to care for the repair
Aftercare is simple:
- Respect the curing time we give you
- Do not leave bottles, razors or sponges standing on the surface
- Don’t leave a chip unrepaired
- Never use suction bath mats
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we’re there. Protection goes down first, then the work takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Let the surface dry out before the visit
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
