Gloucestershire · England
Bath Re-enamelling in Kilcot
Our technicians come to Kilcot for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coating lifting around the plughole
Bath re-enamelling in Kilcot, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. Whether it’s brown or grey marks that don’t clean off and lots of chips and rust spots, we can help.
We stand behind the work with a one-year guarantee.
- Location
- Kilcot (GL18)
- Area hub
- Gloucestershire
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Landlord and trade work in Kilcot
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We work for landlords, letting agents and housing providers in Kilcot as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
How we price bath re-enamelling
Prices start from £350. We price every job individually. What matters most is:
- Unusual colours or finishes
- How many areas need work
- Where the damage is and how we get to it
- What the surface is made of
A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
Good photos mean an accurate price. Here’s what helps:
- Any details about the material
- One sharp close-up of the damage
- Where you are, by postcode
- A picture taken from further back
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job without visiting.
How to look after the repair
It’s all simple stuff, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Don’t let dyes or oils sit on the finish
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t use the bath until it has fully cured
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
FAQs for Kilcot
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do you cover the whole of Gloucestershire?
The entire UK, including all of Gloucestershire. Just include your postcode and we will confirm dates.
Do the materials smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we will ask for another angle.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so mention it when you send pictures.
Will there be fumes?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What we do, step by step
We turn up when we said we would and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
- Clear toiletries, mats and anything else from around the area
Ask for a price
Email us a photo of the damage and one of the whole item, with your GL18 postcode, and we will reply with a fixed price.
Advice
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. Our prices are the same across the UK, so there’s no premium for Kilcot. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Kilcot clients choose us
- One price list for the whole UK
- Work done at your home or business
- One-year guarantee on every repair
- We leave the room as we found it
See our prices page or guide to resurfacing and replacement costs.
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Honest limits
Not everything can be repaired, and we’d rather say so up front. We cannot fix:
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer.
What we work on
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Kilcot and the surrounding area
Kilcot is about 6 miles east of Ross-on-Wye, in Gloucestershire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Kilcot is one of 470 places in Gloucestershire we cover. Our nearest city page is Birmingham, about 44 miles away.
We cover every part of the GL18 postcode area and the streets around it. You’ll find streets such as Kews Lane and Nailers Lane, and we cover them all. If you’re just outside Kilcot, we cover Oxenhall (1 mile north-east), Little Gorsley (1 mile south-west), Gorsley (1 mile west), Beavan's Hill (1 mile west) and Gorsley Common (1 mile west). Larger places within reach include Cheltenham (15 miles east), Gloucester (10 miles south-east), Tewkesbury (13 miles east), Brockworth (13 miles south-east), Quedgeley (10 miles south-east) and Lydney (14 miles south).
Near you in Kilcot
We visit homes around The Kilcot Inn, Christ Church and Newent Community School. Well-known places in the area include Newent Market House Museum (1.6 miles east) and Boulsdon Manor (1.1 miles south-east). The countryside around Kilcot includes May Hill and Wigpool.
Also in Kilcot
About our accreditations · Every repair comes with a one-year guarantee.
