North East Lincolnshire · England
Bath Re-enamelling in Killingholme
Bath re-enamelling in and around Killingholme: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A roll-top that’s seen better days
- Brown or grey marks that do not clean off
Bath re-enamelling in Killingholme without replacing anything
When a bath is structurally fine but worn out on the surface, re-enamelling is normally the most cost-effective option. It avoids removal, plumbing and re-tiling. Our repair technicians work on Victorian roll-tops, pressed steel baths and cast iron baths, and people most frequently call us about a bath in a colour that no longer suits and brown or grey marks that don’t clean off.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Area
- Killingholme (DN40)
- County
- North East Lincolnshire
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Questions from Killingholme
Can I get a quote without a visit?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Places near Killingholme
More services for Killingholme
Do you need bath re-enamelling in Killingholme?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
The most common problems we’re called about are:
- A coating lifting around the plughole
- A coloured bath you want in white
- Brown or grey marks that do not clean off
- Enamel that is lost its shine and feels rough
Comparing quotes
- Is the price fixed, and does it include VAT?
- What prep work is covered
- What protection goes down before work starts
- Aftercare advice
How to care for the repair
To keep it looking its best for years:
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
- Never use suction bath mats
Dry the bath after use if possible, and rinse off any bath products.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Landlords, agents and businesses in Killingholme
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
How the visit works
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If anything looks different from your photos, we will talk to you before going ahead.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Tell us about any previous repairs or coatings
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why us?
- Straight answers about what a repair can do
- Colour mixed on the day to match
- One-year guarantee on every repair
- No extra charge for your area
Take a look at our prices page or resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from pictures. This is what makes a difference:
- Unusual colours or finishes
- The material
- How many areas need work
- Whether it’s a chip, crack, burn or wear
Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Where you are, by postcode
- Something in shot to show the size
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Killingholme and nearby
Killingholme is about 3 miles north-west of Immingham, in North East Lincolnshire. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Our repair technicians cover 34 places across North East Lincolnshire. Our nearest city page is Leeds, about 54 miles away.
Our repair technicians cover all of DN40 and the streets around it. We regularly work on streets such as Top Road, Ulceby Road and Clarkes Road and the roads around them. Other places close to Killingholme include South Killingholme (1 mile south-east), North Killingholme (1 mile north-east), Ulceby Skitter (2 miles south-west), Habrough (2 miles south) and East Halton (2 miles north). Within a short drive, we also cover Grimsby (9 miles south-east), Cleethorpes (11 miles south-east), Immingham (3 miles south-east), Yarborough (8 miles south-east), New Clee (10 miles south-east) and Waltham (11 miles south-east).
Local landmarks in Killingholme
Our clients here include homes close to Church of Saint Denys, Killingholme Primary School and Cross Keys pub and the streets around them. For rail, the closest station is Ulceby station, about 1.4 miles south-west of the centre.
About our accreditations · Every repair comes with a one-year guarantee.
