North Lincolnshire · England
Bath re-enamelling & resurfacing in Ulceby, North Lincolnshire
Full bath re-enamelling and resurfacing in Ulceby, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath in a colour that no longer suits
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We regularly work with letting and managing agents. Send the address, photos and access details and we will handle the rest.
How we handle bath re-enamelling in Ulceby
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Whether it’s stains that won’t shift and a bath in a colour that no longer suits, we can help, whatever the material.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Location
- Ulceby (DN39)
- County
- North Lincolnshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
Here’s how a visit usually runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Plan for the best part of a day. Before leaving, we tell you when it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Mention if the room is upstairs or in a flat
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Related advice
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Our work in Ulceby
Ulceby is about 10 miles south of Kingston upon Hull, in North Lincolnshire. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Ulceby is one of 90 towns and villages in North Lincolnshire where we work. Our nearest city page is Leeds, about 52 miles away.
We cover every part of the DN39 postcode area. From Station Road, Spruce Lane and Front Street or a nearby road, we can come to you. We also cover the places around Ulceby: Ulceby Skitter (1 mile east), Wootton (1 mile north-west), Thornton Curtis (2 miles north-west), South End (4 miles north) and Goxhill (4 miles north). Larger places within reach include Scunthorpe (14 miles west), Barton-upon-Humber (6 miles north-west), Bottesford (15 miles west), Brigg (8 miles south-west), Frodingham (13 miles west) and Crosby (13 miles west).
Landmarks near Ulceby
Around Ulceby, we work in homes near Church of Saint Nicholas, Ulceby St Nicholas Church of England Primary School and The Brocklesby Ox pub and the streets around them. Ulceby’s nearest station is Ulceby station, roughly 1.1 miles east.
Questions from Ulceby
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
How long is the bath unusable?
Most baths are done in a day, ready the day after. We give you timings with the quote.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across North Lincolnshire.
Also in Ulceby
Repairing versus replacing in Ulceby
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why book with us
- Typically one visit, start to finish
- We come to you, anywhere in the UK
- One-year guarantee on every repair
- Honest advice, even when it means no job
Read our full price list and resurfacing vs replacement cost guide.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we will say what we think.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Prices and what affects them
Prices start from £350. We price every job individually. The main factors are:
- Any earlier repairs that need removing first
- Whether we combine several jobs
- The material
- How much damage there is
A repair is priced on what needs doing, not where you live. You will see the full price before booking, with nothing added on the day.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- One picture of the entire bath
- Something in shot to show the size
- Your postcode, so we can check dates
Upload a photo of the damage and a wider shot of the entire item, and tell us you’re in Ulceby, and we will reply with a fixed price.
Aftercare tips
Aftercare is simple:
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
