East Ayrshire · Scotland
Bath re-enamelling & resurfacing in Kilmarnock, East Ayrshire
Bath re-enamelling in and around Kilmarnock: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- Lots of chips and rust spots
About our bath re-enamelling in Kilmarnock
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. We are frequently asked to fix a coating lifting around the plughole and lots of chips and rust spots, on basins & shower trays, acrylic baths and pressed steel baths.
All our work comes with our one-year guarantee.
- Location
- Kilmarnock (KA1, KA3, KA2)
- Area hub
- East Ayrshire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. You will not pay by the hour. The price depends on:
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- The material and finish
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A close-up of the damage, in focus
- The material, if you know it
- Details of any past repairs
- The postcode, so we can plan the visit
The quickest way to a price is to send a couple of photos through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
How it works
We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
- Let us know about parking or access
How to get a price
Most customers in Kilmarnock get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
Kilmarnock and the surrounding area
Kilmarnock is about 19 miles south-west of Glasgow, in East Ayrshire. Jobs in Kilmarnock are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Kilmarnock is one of 53 towns and villages in East Ayrshire we cover. You can also see our page for Glasgow, about 19 miles away.
We cover every part of KA1, KA3 and KA2. From High Street, London Road and Sunnyside Square West or a nearby road, a technician can come to you. Being close to the A71 and A77, Kilmarnock is easy for our repair technicians to reach. Neighbouring places we cover include Annanhill (1 mile west), New Farm Loch (1 mile north-east), Bonnyton (1 mile west), Crookedholm (1 mile east) and Lands of Tour and Kirkland (2 miles north-west). We also work in nearby towns such as Stewarton (5 miles north), Cumnock (14 miles south-east), Galston (4 miles east), Mauchline (8 miles south-east), Darvel (8 miles east) and Newmilns (6 miles east). Kilmarnock is one of the larger places we cover in East Ayrshire.
What’s near Kilmarnock
In Kilmarnock, that means homes near Henderson Church Of Scotland, The Wheatsheaf Inn and Kilmarnock Academy and the streets around them. Kilmarnock has its own railway station: Kilmarnock station. Nearby you’ll also find Burns Monument Centre (within half a mile north-east) and Dean Castle (0.9 miles north-east). Green spaces nearby include Caprington Loch.
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Repair or replace: which is better?
There are times replacing is better: if the bath is cracked through, if you want a different size or shape, or if you are refitting the entire room anyway. Otherwise, resurfacing normally wins. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why Kilmarnock customers choose us
- Colour mixed on the day to match
- Same prices wherever you are
- We leave the room as we found it
- Straight answers about what a repair can do
See our pricing or resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Kilmarnock
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Customers typically contact us about:
- Wear marks under the taps
- Lots of chips and rust spots
- An outdated colour you’d like to change
- A coating lifting around the plughole
What to look for in a quote
- Whether the price covers travel
- What happens if the damage is worse than the photos show
- Who turns up on the day
- Whether the colour is mixed to match
Kilmarnock questions
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo with your KA1 postcode.
What areas do you cover?
All of East Ayrshire, and the rest of the UK. Travel is included in the price.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Can you repair several things at once?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Nearby places to Kilmarnock
What else we do in Kilmarnock
Aftercare tips
To keep it looking its best for years:
- Get any chip repaired quickly
- Store bottles off the bath
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
About our accreditations · Every repair comes with a one-year guarantee.
