Rotherham · England
Bath Re-enamelling in Kilnhurst
Local bath re-enamelling for Kilnhurst: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- A bath in a colour that no longer suits
What we’re called out for in Kilnhurst
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
It’s worth getting a quote if you see:
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Enamel that’s lost its shine and feels rough
Before booking anyone
- Whether a trained technician does the job
- What the guarantee covers, and for how long
- How your room will be protected
- Whether the colour is mixed to match
Bath re-enamelling at your home in Kilnhurst
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people get in touch are a coating lifting around the plughole and wear marks under the taps.
A one-year guarantee comes as standard.
- Area
- Kilnhurst (S64)
- County
- Rotherham
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Kilnhurst?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- Most jobs done in one visit
- Honest advice, even when it means no job
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
See our pricing and guide to resurfacing and replacement costs.
FAQs for Kilnhurst
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Do you come to Kilnhurst?
Yes, we do. We send a technician to Kilnhurst for every job, and the price is the same as everywhere else.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What we cannot put right
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly.
What we work on
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Aftercare tips
Simple care helps the repair last. We recommend:
- Do not leave a chip unrepaired
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
- Stick to gentle, non-abrasive cleaners
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we are done and tell you when it’s ready to use.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Move bottles, mats and clutter away from the area
- Avoid using the area for a few hours before we arrive
- Mention any parking restrictions or tricky access
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
More services for Kilnhurst
What affects the price in Kilnhurst
Prices start from £350. You will know the full cost before booking. We look at:
- Any earlier repairs that need removing first
- Unusual colours or finishes
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- A photo taken from further back
- Any details about the material
Most clients in Kilnhurst get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Landlords, agents and businesses in Kilnhurst
For anyone letting property in or around Kilnhurst, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Where we work around Kilnhurst
Kilnhurst is about 2 miles north-east of Rawmarsh, in Rotherham. Our repair technicians come to homes and businesses in Kilnhurst and nearby villages, so there is no workshop to go to. Kilnhurst is one of 71 places in Rotherham we cover. Our jobs stretch from Kilnhurst to Leeds (about 25 miles away).
Our visits in S64 work the same way as everywhere else we cover. Local streets include Rix Road, Aitken Road and Thorn Road. If you’re just outside Kilnhurst, we cover Swinton (1 mile north), Rawmarsh (2 miles south-west), Abdy (2 miles west), Parkgate (2 miles south-west) and Dalton (2 miles south). Further out, we also cover Rotherham (4 miles south-west), Maltby (5 miles south-east), Dinnington (8 miles south-east), Clifton (4 miles south-west), Broom (4 miles south) and Aston (8 miles south).
Around Kilnhurst
Our clients here include homes close to Swinton Academy, Swinton Academy and Kilnhurst St Thomas CofE Primary Academy, among other places. The closest station to Kilnhurst is Swinton (South Yorks) station, about 0.7 miles north of the centre. Other landmarks nearby include York And Lancaster Regimental Museum (3.6 miles south-west) and Montagu Hospital (1.9 miles north-east). For a walk, there’s Denaby Ings.
About our accreditations · Every repair comes with a one-year guarantee.
