Warwickshire · England
Bath Re-enamelling for Kilsby homes
Full bath re-enamelling and resurfacing in Kilsby, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Bath re-enamelling in Kilsby without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with several chips and rust patches and a coloured bath you want in white, we can typically put it right.
Whatever the size of the job, it’s backed by a one-year guarantee in Kilsby and across Warwickshire.
- Where
- Kilsby (CV23)
- Area hub
- Warwickshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Respect the curing time we give you
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs immediately
Dry the bath after use if possible, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repairing versus replacing in Kilsby
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Prices start from £350. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- CHAS and Constructionline accredited
- Everything repaired in place
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
Take a look at our prices page and resurfacing vs replacement cost guide.
Places near Kilsby
What else we do in Kilsby
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Landlords, agents and businesses in Kilsby
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
What we can’t put right
In fairness, there are a few things a repair will not fix:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- A bath that’s rusted through
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
The process
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. It usually takes the best part of a day, and you can get on with other things while we are there.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know about parking or access
- Keep pets and children out of the room while we work
- Let us know if it has been repaired before
Ask for a price
The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.
Related advice
How we price bath re-enamelling
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- Unusual colours or finishes
- How easy the damage is to reach
- How much damage there is
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- The material, if you know it
- Details of any past repairs
- A wider photo showing the whole bath
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
Kilsby and nearby
Kilsby is about 4 miles south-east of Rugby, in Warwickshire. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in 324 places across Warwickshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 32 miles away.
Postcode districts we cover here: CV23. Jobs here include addresses on Main Road, Independent Street and Manor Road. Kilsby sits on or near the B4038, so getting to you is simple. If you are just outside Kilsby, we cover Barby Nortoft (1 mile north), Houlton (2 miles north), Ashby St Ledgers (2 miles south), Crick (2 miles north-east) and Watford (3 miles south-east). We also work in nearby towns such as Rugby (4 miles north-west), Royal Leamington Spa (15 miles west), Leamington Spa (15 miles west), Southam (11 miles south-west), Brownsover (5 miles north-west) and Bilton (5 miles north-west).
Local landmarks in Kilsby
Locally, our jobs take us to homes close to Church of St Faith and Kilsby Church of England Primary School and the streets around them. Kilsby’s nearest station is Rugby station, roughly 4.3 miles north-west. Well-known places in the area include Naseby Battle And Farm Museum (1.1 miles north-east) and St Luke's Hospital (4 miles north-west).
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
FAQs for Kilsby
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Do you work in Kilsby?
Yes. We work across the UK and come to Kilsby. Send us photos for a fixed quote, or call 0345 017 0787.
Can pets and children be at home?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Is there a guarantee?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
About our accreditations · Every repair comes with a one-year guarantee.
