Norfolk · England
Bath re-enamelling & resurfacing in Kimberley, Norfolk
Full bath re-enamelling and resurfacing in Kimberley, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
Common problems we fix in Kimberley
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
People generally call us after spotting one of these:
- Stains that will not shift
- An old resurfacing that is failing
- A dull, rough surface that won’t come clean
- Worn patches where water runs and sits
Before you book anyone
- Who turns up on the day
- How your room will be protected
- Whether the price is fixed and includes VAT
- What the guarantee covers, and for how long
How we handle bath re-enamelling in Kimberley
Most baths are re-enamelled in a day, and you can use the bath the following day. Nothing is disconnected or removed. We work on cast iron baths, Victorian roll-tops and acrylic baths, and the jobs we see most are worn patches where water runs and sits and several chips and rust patches.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Kimberley (NR18)
- County
- Norfolk
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
Aftercare is simple:
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
- Respect the curing time we give you
- Wash away dyes and oils after use
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Kimberley and the surrounding area
Kimberley is about 3 miles north-west of Wymondham, in Norfolk. Jobs in Kimberley are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Kimberley is one of 797 towns and villages in Norfolk where we work.
Jobs in NR18 are booked in the same way as anywhere else. We also travel to Wicklewood (1 mile south-east), Crownthorpe (1 mile south-east), Hackford (1 mile south-west), The Green (1 mile south) and Hardingham (2 miles west). Within a short drive, we also cover Norwich (10 miles east), Dereham (7 miles north-west), Wymondham (3 miles south-east), Sprowston (12 miles east), Thorpe St Andrew (13 miles east) and Attleborough (6 miles south).
What’s near Kimberley
We visit homes around Church of St Peter and Wicklewood Primary School. The nearest railway station is Wymondham station, about 3.4 miles south-east. Further afield, we also cover the area around Bickley Day Hospital (5.4 miles south) and Wymondham Heritage Museum (3.1 miles south-east).
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- What the surface is made of
- How much damage there is
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send photos for a quote
We price nearly every job from photos. This is what we need:
- Any details about the material
- Details of any past repairs
- Natural light rather than flash
- Something in shot to show the size
If you are in Kimberley and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
How it works
Your technician turns up when we said we would and checks the damage against your photos first. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Clear the area around the damage
- Open a window if you can
- Have somewhere for us to park nearby if possible
Ask for a price
Upload photos of the damage and a wider shot of the entire item, and tell us you are in Kimberley, and we’ll reply with a fixed price.
Related advice
Honest limits
A repair isn’t always the answer, and we would rather say so up front. Repairs will not solve:
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think.
What we work on
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Questions from Kimberley
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Do you charge for travel?
We don’t add a call-out fee. Your fixed quote includes everything.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How much does bath re-enamelling cost in Kimberley?
Resurfacing from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your NR18 postcode.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we will plan for it.
Nearby places to Kimberley
More services for Kimberley
Work for landlords and builders
We work for landlords, letting agents and housing providers in Kimberley as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why Kimberley clients choose us
- We leave the room as we found it
- No extra charge for your area
- Free fixed quotes from pictures
- Every repair guaranteed for a year
See our full price list and resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
