Oxfordshire · England
Bath re-enamelling & resurfacing in Kingston Bagpuize, Oxfordshire
Our repair technicians come to Kingston Bagpuize for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
When to call us in Kingston Bagpuize
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
People typically call us after spotting one of these:
- A coating lifting around the plughole
- A roll-top that’s seen better days
- Thin, worn enamel in places
- Brown or grey marks that don’t clean off
What your quote should include
- Whether a trained technician does the job
- Whether the price is fixed and includes VAT
- How changes to the job are handled
- When it can be used again
Bath re-enamelling in Kingston Bagpuize, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. If you are dealing with an original cast iron bath that needs restoring and stains that won’t shift, we can help, on acrylic baths, cast iron baths and pressed steel baths alike.
The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.
- Area
- Kingston Bagpuize (OX13)
- Area hub
- Oxfordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Questions from Kingston Bagpuize
Can you quote from photos?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is a repair better than a new one?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from pictures. You will get a fixed figure before booking.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to most of the day, tidy-up included.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Tell us about any previous repairs or coatings
- Keep pets and children out of the room while we work
- Make sure the area is dry
Ask for a price
Send us pictures of the damage and one of the entire item, and tell us you’re in Kingston Bagpuize, and we’ll reply with a fixed quote.
Read more
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Honest limits
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A metal bath with a through crack
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
How we price bath re-enamelling
Resurfacing from £350. We charge the same across the UK, including Kingston Bagpuize. The price reflects:
- Whether old repairs or coatings need taking off
- How many areas need work
- How hard the colour is to match
- What the surface is made of
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Send pictures for a quote
Photographing the damage takes a minute. Please include:
- Whether it’s been repaired or coated before
- Natural light rather than flash
- Something in shot to show the size
- What it’s made of, if you know
If you’re in Kingston Bagpuize and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Also near Kingston Bagpuize
Also in Kingston Bagpuize
Covering Kingston Bagpuize
Kingston Bagpuize is about 6 miles west of Abingdon-on-Thames, in Oxfordshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover 443 places in Oxfordshire, from the larger towns to small villages. Our nearest city page is London, about 58 miles away.
Our visits in OX13 work the same way as everywhere else we cover. From Faringdon Road, Southmoor Gardens and Redwood Close or a nearby road, a technician can come to you. Neighbouring places we cover include Longworth (1 mile north-west), Hinton Waldrist (2 miles west), Lyford (3 miles south), Charney Bassett (3 miles south-west) and Pusey (3 miles west). We also work in nearby towns such as Oxford (9 miles north-east), Didcot (9 miles south-east), Abingdon-on-Thames (6 miles east), Witney (8 miles north-west), Carterton (10 miles north-west) and Wantage (6 miles south).
Around Kingston Bagpuize
Our customers here include homes close to Church of St John the Baptist, John Blandy Primary School and The Hinds Head pub, among other places. Well-known places in the area include Abingdon Community Hospital (5.1 miles east) and Hinton Waldrist Castle (1.7 miles west). For a walk, there is Hitchcopse Pit.
DIY kit or professional repair?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Should you replace it?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Repair technicians who travel to you, UK-wide
- One price list for the entire UK
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page and guide to resurfacing and replacement costs.
Looking after it afterwards
Aftercare is simple:
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Don’t use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
Wipe the bath dry after use where you can, and rinse off any bath products.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
