Oxfordshire · England
Bath Re-enamelling in Lyford
Problem with your bath in Lyford? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
Bath re-enamelling at your home in Lyford
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s lots of chips and rust spots and a bath in a colour that no longer suits, we can generally put it right, on acrylic baths, pressed steel baths and cast iron baths alike.
All our work is covered by a one-year guarantee.
- Location
- Lyford (OX12)
- Region
- Oxfordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Lyford
We work for landlords, letting agents and housing providers in Lyford as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.
Why choose Surface Doctor in Lyford
- Rooms protected and left tidy
- No need to remove anything
- Straight answers about what a repair can do
- Fixed prices from your pictures
Take a look at our full price list and guide to resurfacing and replacement costs.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
When a repair is not the answer
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- Problems we cannot see until an old finish comes off
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Acrylic baths
Lyford and the surrounding area
Lyford is about 4 miles north of Wantage, in Oxfordshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Our technicians cover all 443 towns and villages across Oxfordshire, from the larger towns to small villages. You can also see our page for London, about 58 miles away.
We cover every part of the OX12 postcode area. Neighbouring places we cover include Charney Bassett (1 mile west), West Hanney (1 mile south-east), Denchworth (2 miles south), Kingston Bagpuize (3 miles north) and Pusey (3 miles north-west). We also work in nearby towns such as Oxford (11 miles north-east), Didcot (8 miles east), Abingdon-on-Thames (7 miles east), Witney (10 miles north), Carterton (11 miles north-west) and Wantage (4 miles south).
Near you in Lyford
We visit homes around Church of St Mary and The Chequers pub and the streets around them. Further afield, we also cover the area around Abingdon Community Hospital (6 miles east) and Hinton Waldrist Castle (3.1 miles north). For a walk, there is Hitchcopse Pit and Chain Hill.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Do not use the bath until it has fully cured
- A quick wipe after use keeps limescale away
- Keep toiletries on a shelf rather than in the bath
- Do not let dyes or oils sit on the finish
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Your questions about bath re-enamelling in Lyford
How long is the bath unusable?
One day for most baths, ready the day after. We will confirm timings when we quote.
Is there a call-out fee?
We do not add a call-out fee. Your fixed price includes everything.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It typically takes the best part of a day, and you’re welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Ensure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
Prices and what affects them
Prices start from £350. There’s no area surcharge for Lyford. The price reflects:
- The material and finish
- How much damage there is
- The colour and finish to match
- Whether we combine several jobs
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
When you take your photos, a few simple things make all the difference:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- Where you are, by postcode
- A clear, close picture of the problem area
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Nearby places to Lyford
What else we do in Lyford
About our accreditations · Every repair comes with a one-year guarantee.
