Highland · Scotland
Bath Re-enamelling for Kinlochbervie homes
Damaged bath in Kinlochbervie? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- A coating lifting around the plughole
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
About our bath re-enamelling in Kinlochbervie
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. If you’re dealing with enamel that’s lost its shine and feels rough and lots of chips and rust spots, we can generally put it right.
Big or small, you get the same one-year guarantee.
- Where
- Kinlochbervie (IV27)
- Area hub
- Highland
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Kinlochbervie and nearby
Kinlochbervie is in Highland. Wherever you are in the IV27 postcode area, a technician comes to you. Kinlochbervie is one of 253 towns and villages in Highland where we work.
All of IV27 is covered. Local streets include Innes Place, Inchard Place and Manse Road. Other places close to Kinlochbervie include Scourie (8 miles south-west), Scourie More (9 miles south-west), Diuranais (13 miles north-east), Smoo (13 miles north-east) and An Druim Beag (16 miles south). If you are somewhere remote, ring us first and we will plan the trip.
Around Kinlochbervie
Around Kinlochbervie, we work in homes near Church of Scotland Church and Kinlochbervie High School and the streets around them. The countryside around Kinlochbervie includes Loch Càrn Mharasaid.
Looking after it afterwards
Once the work has cured, treat it gently:
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Rinse off hair dye, oils and bath bombs straight away
- Fix dripping taps quickly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- The material
- How many areas need work
- Access to the area
- Unusual colours or finishes
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what helps:
- What it’s made of, if you know
- Details of any past repairs
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Repair or replace in Kinlochbervie?
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why Kinlochbervie customers choose us
- One price list for the whole UK
- Colours mixed by hand to suit your surface
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
Read our prices page and bath cost comparison.
How it works
We begin by going over the job with you, so you know exactly what we are doing. Then the area is sheeted and masked and the work begins. Allow the best part of a day, and we will keep you posted as we go.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Ensure the room can be ventilated
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Getting a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
Kinlochbervie: your questions answered
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before you book.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is it worth repairing rather than replacing?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We will tell you honestly if replacement makes more sense.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Towns and villages near Kinlochbervie
What else we do in Kinlochbervie
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
When to call us in Kinlochbervie
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, typically first under the taps and around the waste.
If you can see any of these, send us a picture:
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
- Wear marks under the taps
What your quote should include
- Whether the price covers travel
- Who will actually do the work
- How your room will be protected
- Whether the colour is mixed to match
About our accreditations · Every repair comes with a one-year guarantee.
