County Durham · England
Bath Re-enamelling for Kirk Merrington homes
Bath re-enamelling in and around Kirk Merrington: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
Bath re-enamelling in Kirk Merrington, done in place
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. We work on acrylic baths, basins & shower trays and Victorian roll-tops, and people most frequently call us about staining under the taps and around the waste and chips and rust in more than one place.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it.
- Location
- Kirk Merrington (DL16)
- County
- County Durham
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
What affects the price in Kirk Merrington
Resurfacing from £350. We price every job individually, from your photos. The main factors are:
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- The material
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Most quotes are done from photos alone. To help us price it:
- A clear, close picture of the problem area
- Where you are, by postcode
- Details of any past repairs
- A picture taken from further back
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Also near Kirk Merrington
Other services in Kirk Merrington
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
What we’re called out for in Kirk Merrington
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.
Look out for these signs:
- Chips and rust in more than one place
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Questions to ask before you book
- A fixed quote, and whether VAT is included
- How the room is protected while they work
- What preparation is included
- Whether the price covers travel
How the visit works
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. Most jobs take a full day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the next day.
Getting ready for the visit
- Let us know if it has been repaired before
- Let us know about parking or access
- Tell us if there are stairs or a lift
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
Read more
Kirk Merrington and the surrounding area
Kirk Merrington is about 2 miles south of Spennymoor, in County Durham. Customers in Kirk Merrington get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We cover 329 places across County Durham. Our nearest city page is Newcastle upon Tyne, about 22 miles away.
Postcode districts we cover here: DL16. From Merrington Road, Merrington Close and Hallgarth or a nearby road, we can come to you. Neighbouring places we cover include North Close (1 mile north), Merrington Lane (1 mile north), Dean Bank (2 miles north-east), Chilton (2 miles south-east) and Ferryhill (2 miles east). We also work in nearby towns such as Durham (7 miles north), Newton Aycliffe (4 miles south), Bishop Auckland (4 miles south-west), Seaham (15 miles north-east), Chester-le-Street (12 miles north) and Peterlee (12 miles north-east).
Landmarks near Kirk Merrington
In Kirk Merrington, that means homes near Church of St. John the Evangelist, Whitworth Park School and Kirk Merrington Primary School. Kirk Merrington’s nearest station is Bishop Auckland station, roughly 3.6 miles west of the centre. Well-known places in the area include Auckland Castle (3.1 miles west) and Bishop Auckland Hospital (3.6 miles south-west).
Questions from Kirk Merrington
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
What areas do you cover?
We cover the whole UK, including Kirk Merrington and the rest of County Durham. Send your postcode with your photos and we will offer you dates.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
How do I get a price for bath re-enamelling in Kirk Merrington?
Prices start from £350. Every job gets a fixed quote from your photos. Send a close-up and a picture of the whole item and your postcode.
Aftercare tips
To keep it looking its best for years:
- Use washing-up liquid and a soft cloth
- Keep toiletries on a shelf rather than in the bath
- A dripping tap should be fixed promptly
- Rinse off hair dye, oils and bath bombs immediately
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
When a repair isn’t the answer
We’ll always be straight with you, so here’s what a repair can’t fix:
- Problems we cannot see until an old finish comes off
- Steel that has corroded right through
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer before you book.
What we work on
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
