Cumbria · England
Bath Re-enamelling for Kirkby Thore homes
Full bath re-enamelling and resurfacing in Kirkby Thore, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Several chips and rust patches
Bath re-enamelling in Kirkby Thore, done in place
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Typical jobs include several chips and rust patches and a bath that stays dull however much you clean it, on acrylic baths, cast iron baths and Victorian roll-tops.
All of our repairs are guaranteed for twelve months in Kirkby Thore and everywhere else. We return to put right any problem with the work.
- Area
- Kirkby Thore (CA10)
- Region
- Cumbria
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Common problems we fix in Kirkby Thore
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
You may need us if you’ve spotted any of these:
- Wear marks under the taps
- Brown or grey marks that don’t clean off
- Several chips and rust patches
- A coating lifting around the plughole
What your quote should include
- Aftercare advice
- When it can be used again
- What the guarantee covers, and for how long
- How your room will be protected
Nearby places to Kirkby Thore
Also in Kirkby Thore
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
How it works
Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
How to get a price
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Read more
Covering Kirkby Thore
Kirkby Thore is about 8 miles east of Penrith, in Cumbria. Our technicians come to clients in Kirkby Thore and the surrounding area, so you do not need to take anything anywhere. We cover all 438 towns and villages in Cumbria, from the larger towns to small villages. We work right across the region, from Kirkby Thore to Newcastle upon Tyne (about 45 miles away).
All of CA10 is within our area. Whether you live on Main Street, Centurion Park and Piper Lane or anywhere nearby, a technician can come to you. We also travel to Bolton (2 miles south), Newbiggin (2 miles north), Temple Sowerby (2 miles north-west), Long Marton (2 miles south-east) and Milburn (2 miles north-east). We also work in nearby towns such as Penrith (8 miles west), Appleby-in-Westmorland (4 miles south-east), Fair Hill (9 miles west), Carleton (7 miles west), Kirkby Stephen (14 miles south-east) and Bongate (5 miles south-east).
Landmarks near Kirkby Thore
We visit homes around Church of St Michael, Kirkby Thore School and Eden Grove School, among other places. For rail, the closest station is Appleby station, about 4.4 miles south-east of the centre. Other landmarks nearby include Appleby Castle (4.6 miles south-east).
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Why choose Surface Doctor in Kirkby Thore
- A year’s guarantee on all work
- Everything repaired in place
- Free fixed quotes from pictures
- One price list for the whole UK
Read our pricing and guide to resurfacing and replacement costs.
What we cannot put right
We will always be straight with you, so here’s what a repair can’t fix:
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think.
What we work on
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Your questions about bath re-enamelling in Kirkby Thore
Do you come to Kirkby Thore?
We do. Technicians travel to Kirkby Thore from across the region, with no extra charge for travel.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Do I have to be there?
Yes. We need access to the room while we work, at a time that suits you.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
What bath re-enamelling costs
Prices start from £350. We charge the same across the UK, including Kirkby Thore. The price reflects:
- How many items we do on one visit
- The size and number of damaged areas
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Getting a price from pictures
When you take your pictures, a few simple things make all the difference:
- What it’s made of, if you know
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Natural light rather than flash
To get a price, send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
